Timing Tools Finder

OEM Search

Submit

Engine Code Search

Submit

Camshaft / Head Rebuild Kit Camshaft / Head Rebuild Kit

Camshaft / Head Rebuild Kit

A specialised cylinder head rebuilt kit designed to allow the camshafts to be correctly fitted into the cylinder head on Porsche / VAG common rail engines.

The set contains a jig, various camshaft support fixtures, gear tooth alignment clamps and locking devices.

  • OEM Equiv: T40094 | T40095 | T40096
  • Applications: VAG 1.6L | 2.0L | 2.7L | 3.0L | 4.0L | 4.2L diesel CR engines | Porsche 3.0 TDi
  • For timing servicing on 2.7L - 4.2L engines, also refer ET1622.

Ford / Mazda Timing Tool Kit

Ford / Mazda Timing Tool Kit

This kit suits Ford F150 | Mazda CX-9 vehicles, and is used to hold the camshafts in position when setting the timing. Includes camshaft holding fixtures and chain tensioner hold down tool.

  • Applications: Ford F150 | Mazda CX-9
  • OEM Equiv: 303-1248 | 303-1530

VAG Camshaft Bar

VAG Camshaft Bar

Specialty cam locking bar for 24V VR6 engines used on some GTI, GLI and all 3.2 liter VR6. Also W8 and W12 engines (two needed). Locks both camshafts at TDC for setting valve timing. Not for 12V VR6, nor any 2.7L, 2.8L or 3.0L conventional V6 engines.

  • Engine codes: 2.8L (BDE) (BDF), 3.2L (BAA) (BJS) (BMX) (BUB), 3.6L (BHK) (BHL) (BLV)
  • Application: Audi A3 (06-09) | A8 (05-09) | Q7 (07-09) | TT (04-09), VW CC (06-09) | EOS (07-09) | Golf (04) | GTI (02-06) | Phaeton (04-06) | R32 (04-08) | Touareg (04-09)

VAG Fuel Pump Drive Kit

VAG Fuel Pump Drive Kit

This useful kit is designed for locking the fuel pump into its timed position so that the pump drive belt can be replaced or the pump timing checked.

This kit is designed for 2.7L | 3.0L TDi engines.

  • Applications: Audi A4 (07-12), A5 (07-12), A6 (08-11) | Q5 (08-12), Q7 (07-12), VW: Phaeton (07-15), Touareg (07-11) | Porsche: Cayenne (08-16)
  • Engine codes: 2.7L CAMA, CGKA, CANA, 3.0L: CCWA, CDYA, CASA, CASD
  • OEM Equiv: T40135 | 3242 | T10320 | T40058

VAG Fuel Pump Pulley Puller VAG Fuel Pump Pulley Puller

VAG Fuel Pump Pulley Puller

A specialised puller for removing the toothed belt pulley from the high pressure pump, in order to enable the removal of the pump. This tool is essential for removing the injection pump.

  • Engine: 1.6L | 2.0L TDI
  • Application: VW Touareg V6
  • OEM Equiv: T40064

VAG High Pressure Pump Puller

VAG High Pressure Pump Puller

A specialised tool to remove the toothed belt drive sprocket on high pressure fuel pumps fitted to VAG 3.0L 6 Cyl 4V diesel engines.

  • Applications: Audi A5 | A6 | A8 | Q7, VW Phaeton | Touareg
  • OEM Equiv: T10320

VAG Injection Pump / Timing Kit VAG Injection Pump / Timing Kit

VAG Injection Pump / Timing Kit

Designed for V6 4v common rail diesel, chain driven engines. Used for turning over & positioning the crankshaft during removal & installation of the camshaft timing chain. Also contains crankshaft aligning pins (with flats) & side alignment pins for crankshaft to cylinder head.

  • Applications: Audi: A4 | A5 | A6 | A8 | Q7 | Allroad, VW: Phaeton | Touareg, Porsche Cayenne

VAG Sprocket Adjusting Tool VAG Sprocket Adjusting Tool

VAG Sprocket Adjusting Tool

Drive gear wheel adjustment tool for engines with a mechanical vacuum pump. Holds the high pressure vacuum pump drive chain sprocket when adjusting cam / crank timing.

  • Engine code: AXZ
  • OEM Equiv: T10363

VAG Timing Kit

VAG Timing Kit

Valve timing kit for late model Audi FSI chain driven engines common to V6 | V8 | V10 engines.

  • OEM Equiv: T40069 | T40070 | T40071

VAG Valve Timing Adjustment Tool

VAG Valve Timing Adjustment Tool

Secures the position of the high pressure pump chain drive sprocket on engines without a mechanical vacuum pump.

  • Engine codes: AXZ | BHK
  • Applications: Touareg (06-10) | Audi Q7 (06-10)
  • OEM Equiv: T10332