Locks chain tensioner in position on VAG petrol engines with a cam belt driving one camshaft & then transferring drive by chain to the other camshaft. A must during assembly & disassembly on 4 | 6 | 8 cylinder engines.

• Applicable years: 98 - 06
• OEM Equiv: 3366 | T20018

Comprehensive kit for engine timing / timing belt renewal on Holden 1.6D / 1.7D (before 2001) & Isuzu 1.5 / 1.7 / 2.0 / 2.2 / 2.3 / 2.4 / 2.5 / 3.0 / 3.1 engines.

This kit is used to set the camshafts in the correct timed position on certain V6 | V8 VAG engines. The kit includes camshaft locking plates, crankshaft locking pins, front panel slides and a belt tensioner adjustment tool.

• Associated tool: ET1297

For changing V ribbed belts. Use with 1/2" sq drv ratchet or breaker bar.

• Engine codes: ABA | AHL | AHU
• Applications: VW Golf | Passat | Polo (93-99)
• 15mm wide slot.

This puller is designed for the removal of balance shafts fitted to 1.8L | 2.0L chain driven 4 cylinder petrol engines.

• M8 x 1.25 internal thread

This locking strap suits VAG 2.4L | 2.8L | 2.7L Turbo 4 Cam 30V engines (99 - 05). Size: 685mm O/A x 6mm & 8mm pins each side x 54mm distance x 40mm hole dia. USE with ET1105-4, ET1657, ET1205B & ET1297.

• Engine codes: ACK | AGA | APR | BBG
• OEM Equiv: 3391

Adjustable design allows it to work on any sprockets of suitable size. Maximum spoke width - odd numbers 27mm, even numbers 17mm. Forcing screw with 17mm hex head. Body width: 133mm.

• Suits 5 or 6 spoke camshaft pulleys
• OEM Equiv: T40001

These two tools are required for setting the camshaft / tensioner on 1.6L | 2.0L petrol engines found in various VAG vehicles from 1997 - 2011.

This kit is suitable for use with replacement cam belt kit: Contitech CT908K1, Gates K015489XS, INA 530 0171 10.

A comprehensive kit for timing belt replacement on a wide range of VAG petrol / diesel engines. Also for PD diesel engines fitted to Ford Galaxy (99-06). Covers PD engines with both hydraulic and mechanical belt tensioners.

• Includes cambelt tensioner tools and camshaft / injection pump locking tools.

This timing kit has been designed for VAG vehicles with 1.6L | 1.8L turbo chain driven engines from 2003. The kit includes a chain tensioner locking tool, a tensioner locking tool, camshaft alignment tool, and two camshaft / crankshaft pulley holding tools.

• Engine: 1.6L | 1.8L FSI (03-08)

For holding camshaft at TDC during timing belt replacement or cylinder head reassembly. (PCD 515mm). Use with ET1105-4, ET1657, ET1205B & ET1297

• Engines: Audi 2.6L | 2.8L 12V V6 petrol (91-00)
• OEM Equiv: 3243
• Engine code: AAH | ABC (V6 2 valve engines)

This tool is used for removing the valve springs on VAG group 4 Cyl 1.8L Turbo 20V petrol engines.

• Applications: Audi A4 (B5) | VW Passat (B5)
• OEM Equiv: 3362

Comprehensive kit for cam belt replacement on single & twin cam diesel belt engines.