This pin locks the crankshaft in its timed position on Automatic Transmissions (via the flywheel) when servicing the camshaft drive chain. This pin has a special half moon cut at the end of the pin in order to lock the flywheel.
Use with ET1900 crankshaft holding tool.
- Applications: Ford Transit (11-14) | Ranger (11-17)
- Engines: 2.2L | 3.2L TDCi diesel
- Engine code: CYFA | P4AT | P5AT
- OEM Equiv: 303-1562
Engine Code(s)
P5AT, P4AT, CYFA
Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
Ford | Transit | VN | CYFA | 2.2L | 2013 | |
Ford | Ranger | PX | P4AT | 2.2L | 2011 | |
Mazda | BT-50 | UR | P4AT | 2.2L | 2011 | |
Ford | Everest | UA | P5AT | 3.2L | 2015 | |
Ford | Ranger | PX | P5AT | 3.2L | 2011 | |
Mazda | BT50 | UR | P5AT | 3.2L | 2015 | |
Mazda | BT50 | UP | P5AT | 3.2L | 2011 | 2015 |
303-1562
Ford Timing Kit
This timing tool kit is designed to locate the crankshaft / flywheel to set the TDC sensor position when servicing the cam chain drive system. Applications include ECOnetic and HDT engines.
The L shaped locking key in this key is designed for manual transmissions. For automatic transmissions refer ET9423 (which is included in this kit).
- Applications: Transit 2.2 (06-) | Ranger (11-) Econetic & HDT engines | Mazda BT-50 (11-16)
- OEM Equiv: 0188H | 303-698 | 303-1587 (49 UN30315870)
Ford Ranger Master Timing Kit
Contains all tools needed for Ranger 2.2L / 3.2L timing (including automatic transmissions), plus high pressure pump puller / locking tools.
The oil seal installation tool is available separately. Refer ET9161.
- OEM Equiv: 303-249 | 303-1317 | 303-1562 | 303-1587
Engine Code(s)
P5AT, P4AT, CYFA
Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
Ford | Transit | VN | CYFA | 2.2L | 2013 | |
Ford | Ranger | PX | P4AT | 2.2L | 2011 | |
Mazda | BT-50 | UR | P4AT | 2.2L | 2011 | |
Ford | Everest | UA | P5AT | 3.2L | 2015 | |
Ford | Ranger | PX | P5AT | 3.2L | 2011 | |
Mazda | BT50 | UR | P5AT | 3.2L | 2015 | |
Mazda | BT50 | UP | P5AT | 3.2L | 2011 | 2015 |
SKU | ET9423 |
Barcode # | 9321280399778 |
Brand | Automotive |
Product weight | 0.1600kg |
Shipping weight | 0.160000kg |
Vehicle Make | Ford |
12 Months
More from this category
BMW Vanos / VCT Socket | 22mm |16 Pt
A special 16 point impact socket for the centring valve of the camshaft timing on BMW & Mini Vanos unit and Ford VCT modules.
- 16 Point impact socket
- 22mm dia
- 1/2" Sq Drv
Crankshaft Front Oil Seal Tool
Required tools when replacing the crank seal / removing front engine cover to replace the chain. For use on 2.0L | 2.2L | 2.4L | 3.2L TDCi / TDDi Duratorq engines fitted to Ford Transit | Ford Ranger plus Jaguar X Type X400 and Land Rover Defender.
- First component removes diesel pump sprocket cover, and also allows oil seal to be removed / replaced.
- Second component aligns / centralises the front camshaft chain cover before fitting the new oil seal.
Crankshaft Locking Tool
For 4 Cyl Pumpe Duse diesel engines (1.9L | 2.0L engine with 2 & 4 valve) with arrow at 12 o'clock position with round sprockets. Also suited to FORD, SEAT & SKODA 1.9L TDi PD 3 & 4 cylinder engines.
- OEM Equiv: T10050
Flywheel Locking Tool
This set locks / holds the flywheel in position to allow the release of the crankshaft pulley screws during timing belt replacement. It has the same functions as ET1574 but with the extra locking adaptors expanding its use on a larger model group in the Ford petrol & diesel engine range.
- Applications across a wide range of Ford engines especially: Diesel 1.8TDdi / TDCi 2.0TDCi, Petrol: 1.6Ti-VCT | later 1.25L / 1.4L 16v Duratec
- Adaptor lengths: 11mm | 29mm | 42mm
Ford / JLR Oil Pump Alignment Tool
Oil pump locking tool for 2.0L, 2.2L, 2.4L, 3.2L diesel engines and 2.3L Duratec petrol engines.
Allows the oil pump to be removed / replaced in the same position (to ensure that the oil pump is not operating with excessive side loads).
- Mondeo | Ranger | Transit (2.0 / 2.2 / 2.4 / 3.2 TDCi / TDDi / Di Duratorq)
- OEM Equiv: 303-705 | 303-1093 (PSA 0198H)