Diagnostic & Electrical

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

Professional quality tester for late model trucks fitted with 7 pin type sockets. These testers are designed for testing the vehicle side socket, not the trailer itself.

There are 2 versions - for either 24N / 24S sockets.

• CANbus compatible.
• 4m cable to allow the unit to be used in the cabin.

Professional quality tester for late model trucks fitted with 7 pin type sockets. These testers are designed for testing the vehicle side socket, not the trailer itself.

There are 2 versions - for either 24N / 24S sockets.

• CANbus compatible.
• 4m cable to allow the unit to be used in the cabin.

A handheld diagnostic tool designed to test circuits / electrical connections.Operates from 3-48V. Includes probe adaptor for testing terminal connections.

An advanced CANbus circuit tester compatible with both 12V and 24V systems.

Provides a live display of present communicating signals, and can display the voltage of each pin without having to use a multimeter.

Essential for checking ground / voltage on all OBDII pins prior to connecting a scan tool / flashing ECU. If your scan tool cannot communicate, it could simply be a fault with the OBD connector.

• Connect inline with scan tools, Or use with a multimeter / oscilloscope.
• Quickly diagnose CAN faults.
• Monitor battery voltage at the OBD port.
• A great way to log pin voltage data when used with our ET2504 multimeter.

• 14 Pin Benz connector

• 20 Pin Isuzu connector

• 3 Pin Isuzu connector

• 30 Pin Iveco connector

• 4 Pin Hitachi connector

This connector cable features a 9 Pin J1939 and a 6 Pin J1708 connector at one end, allowing easy access to heavy duty truck diagnostic ports, while the other end connects to a 16 Pin OBD2 diagnostic tool.

• 6 / 9 Pin round connector

• 6 Pin Hitachi connector

CanDo truck scan tools are supported by an extensive range of specific vehicle connectors. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional calbes.

This cable is an optional cable (not supplied with the CanDo Pro Tab).

• Doosan Bobcat 7 connector

The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.

A specialised diagnostic cable to suit late model CAT equipment.

• 14 pin ET3 connector cable
• Equivalent to CAT 457-6114 cable

• CAT connector

An optional connector pack for the CanDo Pro Tab to provide extended diagnostic functionality.

• JCB 8-PIN
• Cummins 3-PIN
• Kubota 4-PIN
• Caterpillar 14-PIN
• Komatsu 12-PIN

The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.

• Cummins 3 pin connector cable
• Optional cable not supplied with the Pro Tab kit

The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.

This cable is an optional cable / not supplied with the CanDo Pro Tab.

• Deutz connector cable
• Optional cable not supplied with the CanDo Pro Tab kit

An optional diagnostic cable for the CanDo Pro Tab heavy duty scan tool. This connector features a standard 9 pin diesel connector, but with a right angle connector that can lock onto the diagnostic port to avoid coming loose especially during road tests.

• 9 Pin round connector
• Right angle connector, with locking mechanism

An optional diagnostic cable for the CanDo Pro Tab heavy duty scan tool. This connector features a standard 9 pin diesel connector, but with a connector that can lock onto the diagnostic port to avoid coming loose especially during road tests.

• 9 Pin round connector
• Straight connector, with locking mechanism

Replacement docking station to suit CanDo CD01-CD05 tablets only.

The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.

This cable is an optional cable / not supplied with the CanDo Pro Tab.

• Doosan Bobcat 6 connector

Caution: This cable is designed for Doosan Machinery ONLY. While it shares a 14 pin plug similar to the CanDo 14 Pin Benz Connector (ET2608-08), the Doosan application has an inverted ground. Use on early Mercedes Benz vehicles will directly short the supply line to ground. For further information, refer to the Cando Connector companion, or contact [email protected]

This is an OPTIONAL connector, and is not supplied as part of the standard ET2608 kit.

• Applications: Doosan HD only (not Mercedes).
• 14 pin connector
• 38cm overall length

This cable is for use with the CanDo breakout box ONLY.

OE level functionality for Heavy Duty Truck, Agricultural & Industrial applications.

• Heavy, Medium & Light Duty truck coverage for all major Australia / Asian / European / US manufacturers, including Volvo & Iveco
• J1939 / J1708 and OBDII Protocols covered
• Agriculture / Industrial coverage includes Caterpillar, John Deere, Komatsu.
• Full Mercedes Sprinter coverage
• Perform DPF Regeneration; NOX Resets, Injector Programming, Change and Set Parameters, along with SCR/DEF coverage and full bi-directional controls covering over 60 manufacturers.
• Easy updates via WiFi
• IP65 rating | water resistant
• Remote diagnostics via TeamViewer
• Powerful 1.8GHz quadcore processor
• Includes: Multiple connectors, docking station
• Local Australian support
• Global coverage
• Bus, Commercial, Agriculture, Off Highway
• Free initial remote training consultation post purchase
• Australian based technical support only a phone call away
• We regularly test local Australian vehicles for any updates required
• Regular updates & bug fixes (rather than waiting for bi yearly fixes)
• 2 years free updates for all vehicle categories (a $2,800 value)
• No lock out once updates expire
• 4G Sim Card enabled
• Light Commercial now includes: Toyota Hilux / Landcruiser, Ford Ranger, Nissan Navara / Patrol, Isuzu D-Max, Holden Colorado

BUNDLE & SAVE: ET2608P with 24 months Fleetcross subscription

Coverage from Commercial to and including DPF regeneration

The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.

This cable is an optional cable / not supplied with the CanDo Pro Tab.

• Iveco 30 - 19 pin connector cable
• Optional cable not supplied with the CanDo Pro Tab kit

This connector is part of the CanDo range of specialised truck diagnostic connectors. This connector is designed for use with the CanDo range of scan tools.

This is an optional cable and is not included in the standard CanDo cable kit.

• Iveco 38 pin connector

The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.

• JCB 8 pin connector cable
• Optional cable not supplied with the Pro Tab kit

The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.

• Komatsu 12 pin connector cable
• Optional cable not supplied with the Pro Tab kit

For the ULTIMATE level of functionality on Japanese Medium / Light trucks and Sprinter / Iveco Vans.

The ALL NEW MLT PRO has you covered for vehicles up to 26,000 GVM - with Bi-directional controls, full Truck scan functionality,Allison / Eaton Transmission coverage, ABS coverage and much more. Don't overpay for a tool that covers vehicles you don't need - Get more functionality for the vehicles you work on!

• 2 Years Free Updates
• Full Bi-directional Controls
• DPF Resets & Regens (Aftertreatment Leak Test)
• Injector Coding
• EGR Reset on Medium Trucks
• Turbo Charger Calibration & Activation (Required for Turbo Replacement)
• VGT Electronic Actuator Installation & Calibration
• Maintenance Resets
• Cylinder Performance test
• SCR Performance test

LIGHT / MEDIUM TRUCK: Mitsubishi FUSO, Isuzu, Hino, UD, Freightliner

COMMERCIAL VANS: Mercedes Sprinter, Iveco Daily

AMERICAN PICK UPS: Dodge Ram, Ford F-Series and Chevy Silverado

TRANSMISSION: Allison / Eaton

HEAVY TRUCK: All J1939/J1708 Protocols for Read/Clear Code and Live Data

ABS: Wabco / Bendix / Wabash

OBDII GENERIC: Read/Clear Codes and Live DataStream W/ Graphing

• SMALL ROUND 16PIN OBD
• 6PIN / 9PIN
• 16PIN
• Isuzu 3PIN

THE CANDO DIFFERENCE

COMMITTED TO EXCEPTIONAL AFTER MARKET SUPPORT

• Free initial remote training consultation post purchase
• Australian based technical support only a phone call away