Packaged in a BMC, this circuit tester has a standard 4mm connector which can be used with standard multimeter probes.

Wire piercer / probes / alligator clip included.

• Not for use with airbags / vehicle computers.
• For use with DC voltage only.

Professional quality tester for late model trucks fitted with 7 pin type sockets. These testers are designed for testing the vehicle side socket, not the trailer itself.

There are 2 versions - for either 24N / 24S sockets.

• CANbus compatible.
• 4m cable to allow the unit to be used in the cabin.

A handheld diagnostic tool designed to test circuits / electrical connections.Operates from 3-48V. Includes probe adaptor for testing terminal connections.

Specially designed for testing insulation on high voltage cables. An ESSENTIAL tool for working on hybrid or electric vehicle systems. Circuitry inside the unit is built specifically to safely cope with high voltages and currents found in these types of vehicle.

• Conforms to EN61010 / CAT III (1000V
• Supplied with test leads, batteries and carry case

The original Power Probe 3 uses a 20ft cable which attaches to the vehicle's battery, allowing the user to perform an electrical test anywhere in, or around the vehicle. The PP3 is a Voltmeter and Continuity Tester, with Audible & Visual indicators along with two LED headlights to light up your work area. This circuit tester also supplies Battery Voltage or Ground to activate components. This powerful time-saver tool is perfect for every level of technician.

• Voltmeter and Continuity Tester
• Relay & component tester
• Supply battery voltage and ground to test components
• Audio tone 20' Jumper lead
• Works on 12-24V sources
• Protected by 8 Amp circuit breaker

Perform battery checks, charging system checks, fuse checks, voltage checks, component tests...

All at the flick of the switch, while being guided through with our two NEW menu options: EZLEARNING and EZDIAGNOSTIC.

• New larger LCD screen
• Upside down? No problem! New flip screen feature
• Menu driven. Makes navigating a breeze
• Limited edition carbon fibre skin

The Power Probe PP3EZ includes all the powerful testing modes and features of the Power Probe III plus now includes 2 new modes - EZ Learning Mode and EZ Diagnostics Mode. The PP3EZ speeds you through the diagnosing of 12 to 24 volt automotive electrical systems. After connecting the PP3EZ's clips to the vehicle's battery, the automotive technician can determine at a glance, the voltage level and the polarity of a circuit without running for a voltmeter or reconnecting hook-up clips from one battery pole to the other. The power switch allows the automotive technician to conduct a positive or negative battery current to the tip for activating and testing the function of electrical components without wasting time with jumper leads.

• New larger LCD screen
• Upside down? No problem! New flip screen feature
• Menu driven. Makes navigating a breeze