• Magnetised Hex (sec) Power bit
• 3mm hex (for M5 screws)
• 50mm overall length
• 1/4" Sq Drv
• High grade A2 steel construction

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display

testproductforgroz

Radiator test caps for major Chinese car makes, including BYD, Chery, Geely, GWM, Haval, LDV, and MG. Made with high quality and sturdy nylon materials.

Caps connect with a pressure pump (not included - ET1039-1) for leak tests. Or connect to a vacuum tool (not included - ET1039-PURGE) for coolant refill.

Drain pan with inbuilt spout / anti splash lip. Ideal for draining antifreeze or oil (but not spray gun cleaner). Versatile design for workshop use. Also available in green colour.

• 16 litre capacity
• Approximately 400mm diameter x 120mm deep
• Black colour

Oil drain pan with inbuilt spout / anti splash lip. Versatile design for workshop use. Also available in black colour.

• 16 litre capacity
• Approximately 400mm diameter x 120mm deep
• Green colour

Set of two large 16 litre oil drain pans with inbuilt spout / anti splash lip. The anti splash lip helps prevent spills when carrying / pouring. Inbuilt pouring spout makes returning fluid to recycling containers safe & easy. Large handles for easy carrying.

Purpose made for the recovery of oil and antifreeze solutions. Also suitable for parts cleaning with emulsifiable solvents. Made from high density polyethylene with UV stabilisers.

• 16 litre capacity
• Approximately 400mm diameter x 120mm deep
• Colour coded (black / green) to avoid cross contamination / help keep different fluids isolated.

Designed to catch oil from truck wheel hubs after removing the cap. Manufactured from polypropylene, which makes this oil drain non warping and durable.

• 3 litre capacity
• Easy pour evacuation mouth & ergonomic handles with storage capability for hub nuts
• Fits rims with 13-3/4" ID or larger