A special wrench designed for removing / installing the oil mist separator on Fuso 380 trucks (over 17 ton). Also suits buses, including Mitsubishi Canter Eco4 (3.5 | 6.7 | 9 ton).

• Applications: Fuso 380 (engine code 6M70)
• Oil filter number: A66-GF30
• 109mm diameter
• 8 ribs
• 1/2" Sq Drv

NEW DESIGN! Patented ring prevents breakage. Lasts up to 4 longer than traditional design. Plastic sleeve protects surfaces.

• 17 | 19 | 21 | 22mm diameter
• Thin wall construction
• Chrome Moly impact grade
• 1/2" Sq Drv

Remove guesswork from modern vehicle diagnostics by putting every OBDII circuit at your fingertips. This professional breakout box gives technicians instant access to every OBDII circuit for faster fault finding, ECU testing, and network diagnostics. Whether you're diagnosing communication faults, testing CAN bus systems, performing ECU bench testing, or verifying vehicle power and ground circuits, the ET3142 provides the visibility and control that standard scan tools simply can't offer.

Featuring a built-in LCD display with real-time True RMS voltage monitoring across all 16 OBD-II pins, the ET3142 allows technicians to instantly identify power supply issues, ground faults, CAN communication activity, and wiring problems without repeatedly probing connectors. Dynamic signal detection, audible voltage alarms, and ground status indicators help reduce diagnostic time and improve accuracy.

The integrated 120 CAN termination switches make the ET3142 an invaluable tool for ECU bench testing and module diagnostics. By providing proper CAN network termination, technicians can test modules off the vehicle with improved signal integrity and confidence. Compatible with both 12V and 24V systems, it is suitable for passenger vehicles, trucks, buses, and commercial equipment.

• Real Time VRMS Voltage Monitoring - displays real time True RMS voltage on all 16 OBDII pins
• Built In CAN Termination for Bench & ECU Testing - an onboard 120 ohm CAN termination switch is ideal for situations where termination is missing such as single ECU or small bench networks.
• Intelligent Voltage Protection & Audible Alarm System - reverse polarity protection, automatic alarms for over voltage and under voltage conditions, and support for currents up to 2A, ensures that both the vehicle and diagnostic tools stay protected during testing.

Needing a compact butane torch? The Iroda AT-2058 is a compact, high performance micro butane torch. Featuring a soft touch exterior, with a sturdy metal frame, and a safety lock to prevent accidental ignition. It generates a powerful, windproof flame reaching up to 1300¡C (2400¡F).

• Powerful adjustable flame - Easily control intensity for precision work or high-heat applications
• Butane Powered - Refillable design for cost effective, portable use (fuel not included)
• Compact & Lightweight - Ideal for fieldwork, workshops, and on-the-go repairs

This kit combines our two individual kits for the pre 2012 / post 2012 engines on Holden Colorado vehicles.

This kit also suits popular Jeep 2.8L turbo diesel engines.

• Applications: Holden Colorado (Series 1 & 2) | Chrysler Grand Voyager (08>) | Dodge Nitro (07-10) | Jeep Wranger (08-)
• Engine codes: LWH | LWN

This timing kit is designed for the 1.3L 16V double camshaft diesel engine which is used in a wide range of vehicles including Alfa, Fiat, Ford, Holden and Suzuki.

The chain drive connects to the cranshaft to the camshaft output which in turn is connected by the gear to the camshaft input.

• Engine codes: 169A1.000 | 199A3.000

Maintains correct valve timing while servicing cam belt or rebuilding the cylinder head. Suits popular 1.9L - 2.4L JTD SOHC / DOHC Multijet diesel engines on Fiat, Alfa Romeo, as well as some Holden engines.

A comprehensive kit for the 2.2L | 2.5L DCi diesel belt, chain and gear driven engines. These engines are also used in Renault vehicles, along with some Nissan light commercial vehicles.

• Applications: Holden Movano, Renault Espace, Laguna, Master (X70)
• Engine codes: G9U | G9T

A professional timing kit for locking camshaft / crankshafts in position when servicing the timing belt on older model Holden vehicles.

• Applications: SAAB 900 | 9000, Holden Opel | Vectra
• OEM equiv: KM800-1 | KM800-2 | KM800-3 | KM800-4 | KM800-5

Comprehensive timing kit for Chrysler / Jeep vehicles with 2.8L VM Turbo diesel engine. Also first generation Holden Colorado (12-13).

For 2014 onwards Holden Colorado vehicles, please refer to ET4371.

• Engine codes: ENS | LWH