A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

An incredibly handy set of wheel nut sockets. These sockets are new half size sockets for chrome covered nuts which have become swollen / warped.

Inflated / warped chrome plated caps are a common problem, especially on some Ford vehicles. Standard sized wheel nut sockets will not fit, and a half sized variant is required.

The 19.5mm socket is designed for VW Amarok vehicles.

• Thin wall impact sockets (with protective sleeve)
• 18.5mm | 19.5mm diameter
• 6 point sockets
• 1/2" Sq Drv

This timing kit is designed for the 1.3L 16V double camshaft diesel engine which is used in a wide range of vehicles including Alfa, Fiat, Ford, Holden and Suzuki.

The chain drive connects to the cranshaft to the camshaft output which in turn is connected by the gear to the camshaft input.

• Engine codes: 169A1.000 | 199A3.000

Maintains correct valve timing while servicing cam belt or rebuilding the cylinder head. Suits popular 1.9L - 2.4L JTD SOHC / DOHC Multijet diesel engines on Fiat, Alfa Romeo, as well as some Holden engines.

A comprehensive kit for the 2.2L | 2.5L DCi diesel belt, chain and gear driven engines. These engines are also used in Renault vehicles, along with some Nissan light commercial vehicles.

• Applications: Holden Movano, Renault Espace, Laguna, Master (X70)
• Engine codes: G9U | G9T

A professional timing kit for locking camshaft / crankshafts in position when servicing the timing belt on older model Holden vehicles.

• Applications: SAAB 900 | 9000, Holden Opel | Vectra
• OEM equiv: KM800-1 | KM800-2 | KM800-3 | KM800-4 | KM800-5

Comprehensive timing kit for Chrysler / Jeep vehicles with 2.8L VM Turbo diesel engine. Also first generation Holden Colorado (12-13).

For 2014 onwards Holden Colorado vehicles, please refer to ET4371.

• Engine codes: ENS | LWH

Locks camshaft pulleys on ECO TEC engines when removing or replacing the timing belt to retain timing positions. ALSO for SAAB 9.3 - 1.8Li Z18XE.

• Applications: Astra TS | AH, Barina XC, Tigra XC, Vectra JR | JS
• OEM Equiv: K 852 | KM 853