This hydraulic pump is designed to be used with many hydraulic ram type assembly kits such as ET1129, ET1129D, ET1129F, ET1536A, ET1544A, ET1389B, ET1129E etc.

• 3/8" adaptor
• 800kg output
• 700 Bar maximum pressure

A foot operated hydraulic pump allowing hands free operation when using hydraulic powered tools.

• 3/8" connection
• 10 - 30 Tonnes capacity

Specialised electrical disconnect pliers for push tab fittings commonly used on Fuel Injectors, Ignition Coils, Mass Airflow Sensors etc.

• Long length swivel jaws provide access to deep seated / hard to reach connectors
• Applications include Fiat | Mercedes | VAG

Say goodbye to the guesswork in electrical diagnostics. The ET7386 Short Circuit Diagnostic Kit is a professional-grade solution designed to streamline the process of tracing short circuits in automotive and electrical systems.

Manually Resettable Circuit Breaker Fuses: Includes 7 standard blade and 7 mini blade fuses ranging from 5A to 30A. These fuses trip like conventional ones but can be reset for repeated testing - no need to replace them after each fault.

• 7 standard blade / 7 mini blade resettable fuses
• Fuse ranges: 5A | 7.5A | 10A | 15A | 20A | 25A | 30A
• Includes 2x 300mm extension loops

The ET8040 disconnect kit is designed to assist with releasing electronic connectors on Knorr Bremse EBS modules. This kit comprises 3 tools for separating 2, 4, 6 & 12 pole electrical connectors on the trailer module, as well as a tool for loosening the bayonet nut on the power supply connection.

• Ideal for tight working areas on HGV trailers
• Manufactured from steel with vinyl dipped handles for improved comfort / grip

A specialised kit for removing dust / dirt / rust when reseating ABS sensors. The kit contains 5 reamers, and one drill to suit most European vehilces.

Designed for use with a 1/4" drv flexible ratchet handle (not included).

• M10 x 133mm | VAG, Holden
• M14 x 42.5mm | BMW
• M15 x 33.5mm | Mercedes, Mazda, Toyota, Ford
• M18 x 31.5mm | VAG, BMW (E36 | E46)
• M18 x 42.5mm | VAG, NFZ
• M8 x 180mm Drill | VW T5

A specialised reamer for ABS wheel speed sensors. The fixture hole should be thoroughly cleaned before replacing the sensor.

This 11mm reamer enables precise cleaning of the fixture hole, without expanding the hole diameter / damaging the sensor wheel.

• 11mm diameter reamer
• Applications: VAG, including Golf Gen 6 / 7, Audi A3, Skoda Octavia, SEAT Leon

Professional disconnect pliers ideal for disconnecting straight airline quick connectors on heavy duty air brake systems. Interchangeable head allows the pliers to be used on a wide range of connectors.

• Disconnect airlines with 6mm | 8mm | 10mm | 12mm | 15mm | 16mm diameter

For Bendix brakes that have a return spring hooking over a post. The socket end removes springs by rotating the hook post off. The opposite end leverages spring onto post.

• Equivalent to Bendix S13P

This file is designed for removing corrosion, road dirt, brake dust etc from calipers / carriers when replacing brake discs / pads. The reverse blade also functions as a scraper for harder to remove residue.

• Flat 155mm parallel blade with diagonal coarse grooves to reduce clogging.
• Extra slim 10mm style, especially useful on Japanese vehicles with narrow caliper carriers.
• Double sided for easy use.

A handy set of three different pairs of brake caliper hooks. These hooks are ideal for hanging components such as brake calipers, coolant hoses, engine cables, fuel lines etc so that they are not damaged during service.

• Small rigid (red coated) hooks - 160mm long x 6mm dia
• Large rigid (red coated) hooks - 210mm long x 8.3mm dia
• Large flexible (green coated) hooks - 210mm long x 8.3mm dia