A set of support hooks which are ideal for holding the brake caliper, during brake service, to avoid damaging the brake pipes. Also a great solution for hanging other test equipment, such as replenishment bottles.

• Protective coating to avoid damage.
• Solid steel construction | Non flexible
• 2 piece set

Aluminium construction allows these hooks to be moulded to any shape.

• Protective coating to avoid damage.
• Aluminium construction | Flexible
• 2 piece set

An essential service tool for removing the fuel filter cartridge on various LDV vehicles and SAIC Maxus models.

According to manufacturer specifications the filter assembly must be replaced typically every 20K kms making this an essential workshop tool.

• 121mm diameter | 15 slots
• Applications: SC20M engine | D90 Pro, G10 Plus, G20, RV80, T60, T70, T90, V80, V90
• Suits OEM filter assembly: C00283549

Durable workshop essential designed to securely hold nuts, bolts, washers, screws, and other small ferrous parts during servicing, assembly, and repair work. Made from a high quality flexible magnetic material, the mat adheres firmly to steel surfaces and conforms easily to flat or slightly curved areas for convenient placement.

• 15 powerful neodymium magnets
• Convenient 200 x 280mm size

A specialised kit for removing dust / dirt / rust when reseating ABS sensors. The kit contains 5 reamers, and one drill to suit most European vehilces.

Designed for use with a 1/4" drv flexible ratchet handle (not included).

• M10 x 133mm | VAG, Holden
• M14 x 42.5mm | BMW
• M15 x 33.5mm | Mercedes, Mazda, Toyota, Ford
• M18 x 31.5mm | VAG, BMW (E36 | E46)
• M18 x 42.5mm | VAG, NFZ
• M8 x 180mm Drill | VW T5

A specialised reamer for ABS wheel speed sensors. The fixture hole should be thoroughly cleaned before replacing the sensor.

This 11mm reamer enables precise cleaning of the fixture hole, without expanding the hole diameter / damaging the sensor wheel.

• 11mm diameter reamer
• Applications: VAG, including Golf Gen 6 / 7, Audi A3, Skoda Octavia, SEAT Leon

For Bendix brakes that have a return spring hooking over a post. The socket end removes springs by rotating the hook post off. The opposite end leverages spring onto post.

• Equivalent to Bendix S13P

This file is designed for removing corrosion, road dirt, brake dust etc from calipers / carriers when replacing brake discs / pads. The reverse blade also functions as a scraper for harder to remove residue.

• Flat 155mm parallel blade with diagonal coarse grooves to reduce clogging.
• Extra slim 10mm style, especially useful on Japanese vehicles with narrow caliper carriers.
• Double sided for easy use.

A high quality 2 leg honing tool for deglazing cylinder bores, and other similar applications such a brake calipers, and master / slave cylinders. Suitable for wheel / mast cylinders on most small cars.

Spring tension adjusts for positive cutting action, self centering for full stone contact with cylinder walls.

• Bore capacity: 25-64mm
• 28mm medium grit stones