A practical workshop accessory to securely store and organise hand tools on any ferrous surface. Fitted with powerful magnets, the holder provides strong holding force to keep tools firmly in place while allowing quick and easy access when needed.

Ideal for workshops, garages, service vehicles, and industrial environments, the magnetic tool holder helps maximise workspace efficiency by keeping commonly used tools visible, organised, and within reach. Its compact design makes it suitable for use where bench or drawer space is limited, while the durable construction ensures reliable performance in everyday workshop conditions.

• 8 powerful N52 magnets
• 200mm overall length
• A handy 2 pack

A specialised reamer for ABS wheel speed sensors. The fixture hole should be thoroughly cleaned before replacing the sensor.

This 11mm reamer enables precise cleaning of the fixture hole, without expanding the hole diameter / damaging the sensor wheel.

• 11mm diameter reamer
• Applications: VAG, including Golf Gen 6 / 7, Audi A3, Skoda Octavia, SEAT Leon

For Bendix brakes that have a return spring hooking over a post. The socket end removes springs by rotating the hook post off. The opposite end leverages spring onto post.

• Equivalent to Bendix S13P

This file is designed for removing corrosion, road dirt, brake dust etc from calipers / carriers when replacing brake discs / pads. The reverse blade also functions as a scraper for harder to remove residue.

• Flat 155mm parallel blade with diagonal coarse grooves to reduce clogging.
• Extra slim 10mm style, especially useful on Japanese vehicles with narrow caliper carriers.
• Double sided for easy use.

A handy set of three different pairs of brake caliper hooks. These hooks are ideal for hanging components such as brake calipers, coolant hoses, engine cables, fuel lines etc so that they are not damaged during service.

• Small rigid (red coated) hooks - 160mm long x 6mm dia
• Large rigid (red coated) hooks - 210mm long x 8.3mm dia
• Large flexible (green coated) hooks - 210mm long x 8.3mm dia

A high quality 2 leg honing tool for deglazing cylinder bores, and other similar applications such a brake calipers, and master / slave cylinders. Suitable for wheel / mast cylinders on most small cars.

Spring tension adjusts for positive cutting action, self centering for full stone contact with cylinder walls.

• Bore capacity: 25-64mm
• 28mm medium grit stones