Effective diagnostic tool for determining whether faults are due to the turbo system, or simple air leaks. Simply pressurise using shop air.

The maximum pressure in most turbo systems is approximately 15 PSI - 25 PSI. When connecting the airline to these test caps, always regulate air pressure in the test to 25 PSI maximum. Over pressurisation will damage system components.

A graduated approach to leak testing is recommended. Start with 5 PSI to find large leaks, and progressively increase in 5 PSI increments.

• Kit includes 4 pairs of stepped adaptors to fit most sizes found on passenger vehicles.
• Includes pressure gauge, shut off valve, and pressure release valve.
• Adaptor sizes: 35-90mm

Achieve perfect torque every time with this versatile and reliable torque adapter. The ET1234 Torque Adapter is a precision tool designed to prevent over-tightening of delicate components, such as plastic and aluminum oil filter canisters and filters, and sump plugs etc. It converts any 3/8" drive ratchet or breaker bar into a 25 Nm torque wrench, ensuring accurate tightening to manufacturer specifications.

• Accurate Torque Control: Converts any 3/8" drive ratchet or breaker bar into a precise 25 Nm torque wrench. Protect components from damage caused by over tightening.
• Durable Construction: Built with high-quality materials to ensure long-lasting performance.
• User-Friendly Design: Simple to attach and use with a 3/8" drive tool.
• Not for use with impact / pneumatic tools.

• SPREAD: 80mm
• REACH: 90mm
• CAPACITY: 1.1 tonnes

A special self gripping puller with slim legs. Able to be used with a slide hammer.

• Spread: 150mm
• Reach: 150mm
• Capacity: 1.1 tonnes

A special self gripping puller with slim legs. Able to be used with a slide hammer.

• Spread: 15 - 200mm
• Reach: 200mm
• Capacity: 1.17 tonnes

Hardened drop forged alloy steel jaws for pulling internal bearing caps, seals bushings. A cone holds the jaws in place during pulling. Use with a 5/8-18 slide hammer.

• 5/16" - 3-1/4" spread
• 3-1/2" reach

A specialised kit for extracting blind hole bearings. This kit contains eight adaptors plus a slide hammer and two leg puller.

Please refer to the download link below for instruction manual / kit components.

For balancer, pulley, gear & flywheel. Drop forged 4-slot yoke and a variety of cap bolts and forcing screw tips make this set universal.

• Includes 5/16" | 3/8" | M8 bolts.
• Do NOT use with impact wrenches.