Silvertronic multimeter leads are made in the UK. Designed for professional use, Silvertronic silicone leads are double insulated.

Silicone leads can withstand high temperature, including the heat of such things as hot manifolds and soldering iron tips.

• 1000V CAT III 20A
• 2m long cables (colour coded)
• Extra thin 0.7mm OD
• Supplied in a 4 pocket test lead organiser for convenient storage.

• IEC 1010 rating: 1000V CATIII double / reinforced insulation 20A
• Threaded contact
• 1.2m double insulated silicone cable
• Bi coloured layers

The ET8626 is a professional battery and charging-system tester designed for fast, accurate assessment of all 12V automotive lead acid cranking batteries - including modern stop-start types, and for evaluating 12V and 24V alternator and starting system performance. This tester delivers clear, reliable diagnostics in seconds, and the built-in thermal printer allows you to produce instant test reports for customer records or workshop documentation.

• Compatible With All Major Battery Standards - accurately tests batteries across all common industry standards, ensuring reliable results whether you're working with automotive, commercial, marine, or deep cycle 12V batteries.
• High Load Voltage Testing for 12V & 24V Systems - maximum load voltage tests on both 12 volt and 24 volt electrical systems, making it suitable for cars, trucks, machinery, and mixed fleet applications.
• Built In Short Circuit & Reverse Polarity Protection - integrated safety features to prevent damage to the tester and the battery, even if connections are made incorrectly.
• Wide 100–2,000 CCA Testing Range - enabling accurate assessments of everything from small passenger batteries to heavy duty commercial units.

The Power Probe Temperature Kit is designed to give readings for ambient temperature and from the wireless Temperature Probe.

The Tempkit has a built-in temperature sensor in the base unit, plus a temperature sensor in the remote wireless Probe. This allows for multiple readings simultaneously.

One additional wireless Temperature Probe (TEMPPROBE) is available separately, for a second temperature reading.

• Measuring Range: -22°C to 70°C
• Wireless Transmitter Distance: 5m (16.5 Feet)
• Accuracy ±2.0°F(±2.0°C)
• Backlit LCD Display
• Requires 2x AA and 2x AAA Batteries (NOT INCLUDED)

An essential set of popular sizes of brake caliper sockets used on Audi / VW / Porsche vehicles.

These sockets are specialised 7 Point & 10 Point sockets with a range of different diameters (which are measured from the inside rim of the sockets).

• 9mm | 10 Point - Audi Q7 / Touareg / Porsche
• 11.5mm | 10 Point - Porsche
• 14mm | 7 Point - Audi Q7
• 15mm | 10 Point - Audi Q7 / Porsche
• 20mm | 10 Point - Porsche Cayenne
• 22mm | 7 Point - Audi S5

Heavy vehicles require higher capacity smoke machines. The new SmokeMan HD delivers up to 120 PSI max pressure. Test more than just engines. Check for leaks on small water tanks etc...

However, please note that smoke (mineral oil and / or UV dyes) must not be injected into braking systems.

• Both flow and pressure control
• Up to 120 PSI max pressure (compressed air required)
• Heavy vehicle adaptor set included
• Dual gauges - Test and System Pressure
• 12 month warranty

• SPREAD: 80mm
• REACH: 90mm
• CAPACITY: 1.1 tonnes

A special self gripping puller with slim legs. Able to be used with a slide hammer.

• Spread: 150mm
• Reach: 150mm
• Capacity: 1.1 tonnes

A special self gripping puller with slim legs. Able to be used with a slide hammer.

• Spread: 15 - 200mm
• Reach: 200mm
• Capacity: 1.17 tonnes

Hardened drop forged alloy steel jaws for pulling internal bearing caps, seals bushings. A cone holds the jaws in place during pulling. Use with a 5/8-18 slide hammer.

• 5/16" - 3-1/4" spread
• 3-1/2" reach

A specialised kit for extracting blind hole bearings. This kit contains eight adaptors plus a slide hammer and two leg puller.

Please refer to the download link below for instruction manual / kit components.

A heavy duty mechanical / hydraulic hub puller kit for various stud patterns up to five studs. The individual legs, on a raised yoke assembly, allows for quick attachment to vehicle hubs.

Suitable for removing wheel hubs mounted on tapered axles, as well as press fit rear brake drums.

• Includes heavy duty striking handle
• 190mm reach
• 10 Tonne hydraulic ram