A versatile kit for removing hub pullers. The kit provides for two removal methods - either using a force screw, or for stubborn hubs, a slide hammer.
Ideal for removing wheel hubs, half shafts, brake drums, driveshafts etc directly from the vehicle. A mechanical spindle can press out the drive shaft.
Use the force screw for extracting drum / disc / hub assemblies, or for stubborn hubs the slide hammer is an ideal alternative.
- Applications: 3 | 4 | 5 | 6 metric stub hubs
- Sizes: M12 x 1.5 | M14 x 1.5
- Size range: PCD 90-130mm
- Includes a 4.3kg slide hammer, and threaded spindle for pushing out half shafts
SKU | ET6648 |
Barcode # | 9321280403079 |
Brand | Automotive |
Vehicle Make | Universal |
12 Months
Others also bought

Digital LED Circuit Tester | 6-48V DC
A professional quality circuit tester, with an LED display which provides real time voltage (in addition to indicating power (RED) and ground (GREEN)).
This unit has a fixed 90mm probe. See also ET3426A which is a similar tester, but with a standard 4mm connector.
- Spring cable extends to 3 metres
- 6V - 48V DC testing range
- Small testing current (<10mA)
- NOT for use with 240V AC | NOT for use with airbags


Axle Nut Impact Socket Set | Deep | 12Pt
- 12 Point
- Deep
- 1/2" Sq Drv
- Sizes: 29, 30, 32, 34, 35, 36, 38, 39mm

Adjustable Wheel Bearing Lock Nut Wrench
Adjustable jaws fit all hexagon (49 - 135mm) & octagon (49 - 143mm) wheel bearing lock nuts. Contains three sets of pins, applicable to any pin holes on the nut.
- 6 Point lock nuts: 1-3/4" - 5-3/4" (49 - 135mm)
- 8 Point lock nuts: 1-3/4" - 5-5/8" (49 - 143mm)
- Pin diameters: 1/4" | 5/16" | 3/8"
More from this category

2-9/16" 6 Pt Wheel Bearing Locknut Wrench
Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.
- 2-9/16" (65mm) opening
- 98mm overall length
- 3/4" Sq Drv

3-1/4" 6 Pt Wheel Bearing Locknut Wrench
Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.
- 3-1/4" (83mm) opening
- 98mm overall length
- 3/4" Sq Drv

3-1/4" 8 Pt Wheel Bearing Lock Nut Wrench
Deep clearance socket for tightening special round cornered 8 point nuts on truck wheel bearing locknuts. Use with extension / torque wrench.
- 3-1/4" (83mm) opening | 8 Point
- 98mm overall length
- 3/4" Sq Drv

Adjustable Wheel Bearing Lock Nut Wrench
Adjustable jaws fit all hexagon (49 - 135mm) & octagon (49 - 143mm) wheel bearing lock nuts. Contains three sets of pins, applicable to any pin holes on the nut.
- 6 Point lock nuts: 1-3/4" - 5-3/4" (49 - 135mm)
- 8 Point lock nuts: 1-3/4" - 5-5/8" (49 - 143mm)
- Pin diameters: 1/4" | 5/16" | 3/8"

Axle Locking / Drive Flange Locking Kit
This specialised tool locks the drive flange to prevent rotation when servicing the inner drive shaft mounting bolts / hub nuts.
The specially designed plastic wheels wedge between the brake caliper and the drive flange, using the vehicle's own wheel bolts or nuts.
- Allows easy removal of driveshaft / hub fixings.
- One person operation.


Bearing Removal Adaptor Kit
A specialised adaptor kit to remove / install front and rear wheel bearings with spindles, on the vehicle. Designed to reduce the chance of damage to the hub and bearing, while saving time. Sleeves fit most standard wheel bearing sizes.
- Suitable for use with impact wrench
- Applications: Mercedes, BMW, VW, Audi, Porsche, Volvo, Toyota, Lexus, Nissan, Infiniti, Honda, Acura