This funnel can be molded into different shapes making it ideal to drain hard to reach oil filters.

This size is ideal for use with larger vehicles. A smaller size is available which is more suited for passenger cars (ET7267).

• Suitable for use with engine oil, brake fluid, ATF and coolant
• Size: 205mm x 556mm

Remove guesswork from modern vehicle diagnostics by putting every OBDII circuit at your fingertips. This professional breakout box gives technicians instant access to every OBDII circuit for faster fault finding, ECU testing, and network diagnostics. Whether you're diagnosing communication faults, testing CAN bus systems, performing ECU bench testing, or verifying vehicle power and ground circuits, the ET3142 provides the visibility and control that standard scan tools simply can't offer.

Featuring a built-in LCD display with real-time True RMS voltage monitoring across all 16 OBD-II pins, the ET3142 allows technicians to instantly identify power supply issues, ground faults, CAN communication activity, and wiring problems without repeatedly probing connectors. Dynamic signal detection, audible voltage alarms, and ground status indicators help reduce diagnostic time and improve accuracy.

The integrated 120 CAN termination switches make the ET3142 an invaluable tool for ECU bench testing and module diagnostics. By providing proper CAN network termination, technicians can test modules off the vehicle with improved signal integrity and confidence. Compatible with both 12V and 24V systems, it is suitable for passenger vehicles, trucks, buses, and commercial equipment.

• Real Time VRMS Voltage Monitoring - displays real time True RMS voltage on all 16 OBDII pins
• Built In CAN Termination for Bench & ECU Testing - an onboard 120 ohm CAN termination switch is ideal for situations where termination is missing such as single ECU or small bench networks.
• Intelligent Voltage Protection & Audible Alarm System - reverse polarity protection, automatic alarms for over voltage and under voltage conditions, and support for currents up to 2A, ensures that both the vehicle and diagnostic tools stay protected during testing.

A specialised kit for replacing O-ring seals on the bottom of petrol injectors in a range of BMW engines.

This kit includes a small slide hammer which screws onto the top of the injector.

• Applications: N13 | N14 | N18 | N20 | N43 | N54 | N55 | N63 | N73 | S55 | S63 | B38 | B48
• Guide cones: 7.45mm / 7.8mm
• Seating sleeves: 8.9mm (7.8mm) | 9.3mm (8.0mm) | 9.5mm (8.1mm)
• Seating tool: 9.2mm (9.05mm)
• OEM Equiv: 130280 | 130281 | 130282 | 130283 | 130190 | 130192 | 130193 | 130194

Precision meets practicality with the ET1550 Seal Installer Kit, engineered for seamless removal and installation of front crankshaft oil seals across a wide range of BMW engines. Whether you're a professional technician or a dedicated DIYer, this tool ensures a damage-free, factory-grade seal replacement.

• Engine codes: B40 | N42 | N45 | N45T | N46 | N46T | N51 | N52 | N52K | N53 | N54
• OEM Equiv: 11 9 221 | 11 9 222 | 11 9 223 | 11 9 224 | 11 9 231 | 11 9 232 | 11 9 233

The ET1394A is a precision-engineered tool kit designed for the removal and installation of front crankshaft oil seals on a wide range of BMW engines. Built to meet professional standards, this kit ensures a clean, damage-free seal replacement processÑessential for maintaining engine integrity and performance.

• Applications: N40 | N42 | N45 | N45T | N46 | N46T | N52 | N53 | N54
• OEM Equiv: 11 9 220 | 11 9 230

This master kit is a combination of our ET1394A and ET1188C kits. This kit is designed to remove / install the crankshaft front / rear oil seals on a wide range of BMW vehicles.

• Applications: N40 | N42 | N45 | N45T | N46 | N46T | N52 | N53 | N54

The ET1438B is a specialised kit engineered for precise removal and installation of crankshaft front and rear oil seals on a wide range of BMW 4 & 6 cylinder engines from 2009. Designed for professional technicians and workshop use, this kit ensures damage-free seal replacement and optimal alignmentÑsaving time and reducing the risk of costly errors.

• Engines: N40 | N42 | N45 | N45T | N46 | N46T | N52 | N52N | N53 | N54 | N55
• OEM Equiv: 11 9 220 | 11 9 230 | 11 9 235

A master kit for removing installing both front / rear crankshaft oil seals. A time saving kit, that avoids the risk of damage when installing new oil seals.

• Applications: 4 cylinder | 6 cylinder engines
• Engines: N40 | N42 | N45 | N45T | N46 | N46T | N52 | N53. | N54 | N55
• OEM Equiv: 119220 | 119230 | 119235