A specialised kit for safely removing / installing the front crankshaft oil seal on 4 Cyl & 6 Cyl BMW engines.

This updated kit is suitable for a wide range of BMW N series engines.

• Applications: N42 | N45 | N46 | N52 | N52K | N53 | N54 | N55
• OEM Equiv: 11 0 370, 11 9 220 & 11 9 230

The Endeavour ET2024R is a compact, high-performance thermometer designed specifically for automotive and HVAC professionals. Featuring a 110mm foldable stainless steel probe, it delivers fast and accurate temperature readings across a wide range from -50¡C to 300¡C.

• Rechargeable Battery - say goodbye to button batteries with simple USB Type-C charging
• Fast checking of vent temperatures
• Large backlit display - easy to read in low-light environments
• IP65 waterproof

Ensure your vehicle's cooling system stays corrosion-free and efficient with the ET5676 Antifreeze pH Meter - a professional tool designed to accurately measure the pH level of antifreeze and coolant solutions.

With EV vehicles as coolant decays, the acidity can increase, causing corrosion within the cooling system. This tester allows for quick testing of the coolant PH.

• Most automotive coolants should have an acidity level greater than 7.5. Check manufacturer specifications for suitable PH range.
• Measuring range: 0.00 - 14.00 PH | Resolution: 0.01PH | Accuracy: /- 0.1PH
• Operating temperature: 0 - 50¡C (Auto temperature compensation: 0 - 50¡C)
3x LR44 batteries (included)

A specialised kit for replacing O-ring seals on the bottom of petrol injectors in a range of BMW engines.

This kit includes a small slide hammer which screws onto the top of the injector.

• Applications: N13 | N14 | N18 | N20 | N43 | N54 | N55 | N63 | N73 | S55 | S63 | B38 | B48
• Guide cones: 7.45mm / 7.8mm
• Seating sleeves: 8.9mm (7.8mm) | 9.3mm (8.0mm) | 9.5mm (8.1mm)
• Seating tool: 9.2mm (9.05mm)
• OEM Equiv: 130280 | 130281 | 130282 | 130283 | 130190 | 130192 | 130193 | 130194

Precision meets practicality with the ET1550 Seal Installer Kit, engineered for seamless removal and installation of front crankshaft oil seals across a wide range of BMW engines. Whether you're a professional technician or a dedicated DIYer, this tool ensures a damage-free, factory-grade seal replacement.

• Engine codes: B40 | N42 | N45 | N45T | N46 | N46T | N51 | N52 | N52K | N53 | N54
• OEM Equiv: 11 9 221 | 11 9 222 | 11 9 223 | 11 9 224 | 11 9 231 | 11 9 232 | 11 9 233

The ET1438B is a specialised kit engineered for precise removal and installation of crankshaft front and rear oil seals on a wide range of BMW 4 & 6 cylinder engines from 2009. Designed for professional technicians and workshop use, this kit ensures damage-free seal replacement and optimal alignmentÑsaving time and reducing the risk of costly errors.

• Engines: N40 | N42 | N45 | N45T | N46 | N46T | N52 | N52N | N53 | N54 | N55
• OEM Equiv: 11 9 220 | 11 9 230 | 11 9 235

This master kit is a combination of our ET1394A and ET1188C kits. This kit is designed to remove / install the crankshaft front / rear oil seals on a wide range of BMW vehicles.

• Applications: N40 | N42 | N45 | N45T | N46 | N46T | N52 | N53 | N54

A master kit for removing installing both front / rear crankshaft oil seals. A time saving kit, that avoids the risk of damage when installing new oil seals.

• Applications: 4 cylinder | 6 cylinder engines
• Engines: N40 | N42 | N45 | N45T | N46 | N46T | N52 | N53. | N54 | N55
• OEM Equiv: 119220 | 119230 | 119235

The ET1888A is a specialised kit designed for precise removal and installation of the front crankshaft oil seal on BMW N20 engines. Built to meet OEM standards, this kit ensures a clean, damage-free seal replacementÑessential for maintaining engine performance and preventing oil leaks.

• Engine code: N20
• Applications:116i / 118i / 120i (F20 / F21, 2011-2015), 328i / 330i / 335i (F30/F31, 2011-2015), X1 xDrive20i / 28i (E84, 2011-2015), Z4 sDrive20i / 28i (E89, 2011-2016)
• OEM Equiv: 110 371 | 110 372 | 2 212 822 | 119 231 | 119 233