VW GEN2 85mm Wheel Bearing Removal Kit

SKU: ET4266

Automotive


A specialised kit for servicing Gen II wheel hubs / bearings on vehicles with 85mm diameter front wheel bearings. These tools ensure that the insertion loads are taken only on the outer race of the bearing. Gen II wheel bearings are a wheel bearing / drive flange that cannot be separated.

Always adequately lubricate threaded force screws and thrust bearings. And ensure that the wheel hub unit is pushed onto the outer bearing ring, behind the locking crown. Do NOT use a press on the centre flange!

  • Applications: VW Multivan | Touareg | Transporter | T5
  • For 85mm wheel bearings (front | rear)

SKU ET4266
Barcode # 9321280349582
Brand Automotive
Product weight 8.4000kg
Shipping weight 8.400000kg
Vehicle Make Volkswagen

12 Months


Others also bought


NEW
Promo
Cummins Front & Rear Crankshaft Seal Installer

Cummins Front & Rear Crankshaft Seal Installer

The ET1766F is a professional-grade tool kit engineered for precision removal and installation of front and rear crankshaft seals on Cummins 3.9L, 5.9L, and 6.7L engines. Whether you're servicing ISB, QSB, or B-series engines, this master kit ensures a damage-free, leak-proof seal replacement every time.

  • OEM equiv: 3824498 | 3824500 | 3164660 | 3824078 | 3164659 | 3937111 | 3904353 | 3802820 | 3934486 | 3926126 | 3925529


More from this category


2-9/16" 6 Pt Wheel Bearing Locknut Wrench

2-9/16" 6 Pt Wheel Bearing Locknut Wrench

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

  • 2-9/16" (65mm) opening
  • 98mm overall length
  • 3/4" Sq Drv

3-1/4" 6 Pt Wheel Bearing Locknut Wrench

3-1/4" 6 Pt Wheel Bearing Locknut Wrench

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

  • 3-1/4" (83mm) opening
  • 98mm overall length
  • 3/4" Sq Drv

3-1/4" 8 Pt Wheel Bearing Lock Nut Wrench

3-1/4" 8 Pt Wheel Bearing Lock Nut Wrench

Deep clearance socket for tightening special round cornered 8 point nuts on truck wheel bearing locknuts. Use with extension / torque wrench.

  • 3-1/4" (83mm) opening | 8 Point
  • 98mm overall length
  • 3/4" Sq Drv

Promo
Adjustable Wheel Bearing Lock Nut Wrench

Adjustable Wheel Bearing Lock Nut Wrench

Adjustable jaws fit all hexagon (49 - 135mm) & octagon (49 - 143mm) wheel bearing lock nuts. Contains three sets of pins, applicable to any pin holes on the nut.

  • 6 Point lock nuts: 1-3/4" - 5-3/4" (49 - 135mm)
  • 8 Point lock nuts: 1-3/4" - 5-5/8" (49 - 143mm)
  • Pin diameters: 1/4" | 5/16" | 3/8"

Axle Locking / Drive Flange Locking Kit

Axle Locking / Drive Flange Locking Kit

This specialised tool locks the drive flange to prevent rotation when servicing the inner drive shaft mounting bolts / hub nuts.

The specially designed plastic wheels wedge between the brake caliper and the drive flange, using the vehicle's own wheel bolts or nuts.

  • Allows easy removal of driveshaft / hub fixings.

  • One person operation.

Bearing Removal Adaptor Kit Bearing Removal Adaptor Kit

Bearing Removal Adaptor Kit

A specialised adaptor kit to remove / install front and rear wheel bearings with spindles, on the vehicle. Designed to reduce the chance of damage to the hub and bearing, while saving time. Sleeves fit most standard wheel bearing sizes.

  • Suitable for use with impact wrench
  • Applications: Mercedes, BMW, VW, Audi, Porsche, Volvo, Toyota, Lexus, Nissan, Infiniti, Honda, Acura