Replacement rubber boot for the ET4151 CV boot gun.

Designed for fastening band clamps on CV boots. Crank and handle allows for tension to be kept while tightening the clamps during installation.

Made from quality steel construction with powder coated finish.

• 10mm (3/8") maximum band width
• 230mm overall length

A specialised kit for removing / installing seized output CV shafts in wheel hubs. This kit suits many BMW vehicles, but not the E53 X5. For this vehicle, refer ET1253D.

• Applications: E30 | E31 | E32 | E36 | E39 | E46 | E52 | E53 | E60 | E63 | E64 | E65 | E66 | E67 | E83 | E85 | RR1

A specialised kit for removing / installing seized output CV shafts in wheel hubs.

This kit includes adaptors for the X1 | X3 | X5 | X6.

• Applications: E30 | E31 | E32 | E36 | E39 | E46 | E52 | E53 | E60 | E63 | E64 | E65 | E66 | E67 | E70 | E71 | E83 | E85 | RR1

A specialised tool holds the driveshaft connecting nut. This is designed for use with the ET1653A.

• Engines: N20 | N52 | N54 | N55 | N57 | N63 | S63
• Series: F10 | F25

With 3/8" Sq Drv for fitting new stainless bands on drive shafts where a torque setting is specified. Suits VW, Audi, Ford, GM etc

• Suitable for use with a 3/8" torque wrench.
• Or can be used by hand / with a standard ratchet when no torque is specified
• OEM equiv: 1682A

Driveshaft boot pliers for use on OTK type metal CV boot clips. Extra heavy duty for use by hand or with torque wrench / breaker bar.

These pliers have a 1/2" Sq Drv (on the handles) for attaching a torque wrench, when the manufacturer specifies torque settings.

• Crimping action avoids damage / correctly tensions the clip
• PVC dipped handles