Adjustable jaw design makes these pliers ideal for removing quick connnect, snap and side & lock couplers, on a wide range of vehicles.

• Applications include: Alfa, Audi, BMW, Chrysler, Citroen, Fiat, GM, Lancia, Lexus, Mercedes, Opel, Peugeot, Renault, SEAT, Skoda, Toyota, VW etc

Industry leading live graphing on colour screen.

100kPa pressure range, with adaptor kit included.

Use with scan tool live data to compare with actual pressure readings.

An essential workshop tool.

• Inlet manifold pressure
• DPF pressure gradient
• Turbo output pressure

The Endeavour ET2024R is a compact, high-performance thermometer designed specifically for automotive and HVAC professionals. Featuring a 110mm foldable stainless steel probe, it delivers fast and accurate temperature readings across a wide range from -50¡C to 300¡C.

• Rechargeable Battery - say goodbye to button batteries with simple USB Type-C charging
• Fast checking of vent temperatures
• Large backlit display - easy to read in low-light environments
• IP65 waterproof

Ensure your vehicle's cooling system stays corrosion-free and efficient with the ET5676 Antifreeze pH Meter - a professional tool designed to accurately measure the pH level of antifreeze and coolant solutions.

With EV vehicles as coolant decays, the acidity can increase, causing corrosion within the cooling system. This tester allows for quick testing of the coolant PH.

• Most automotive coolants should have an acidity level greater than 7.5. Check manufacturer specifications for suitable PH range.
• Measuring range: 0.00 - 14.00 PH | Resolution: 0.01PH | Accuracy: /- 0.1PH
• Operating temperature: 0 - 50¡C (Auto temperature compensation: 0 - 50¡C)
3x LR44 batteries (included)

This specialised tool installs CV boots without the need to first remove drive shafts from the vehicle, or the CV joint from the drive shaft.

Use with standard shop air. Not suitable for plastic CV boots.

• Suits CV joint dia: 25-110mm
• 1/4" BSP air inlet size
• 72 - 113 PSI working pressure
• Replacement rubber boot available (ET4151-RB)

Special dies for rethreading / repairing axle threads on spindles. Their twist shapes makes for faster / easier repairs. Includes 8 popular metric and imperial sizes. Made from high quality tempered steel.

Always use with a light oil to lubricate thread.

• Metric die - M20 x 1.25
• Metric die - M20 x 1.50
• Metric die - M22 x 1
• Metric die - M22 x 1.5
• Metric die - M24 x 1.5
• Metric die - M24 x 2.0
• UNF die - 3/4 x 20
• UNF die - 13/16 x 20

Designed for fastening band clamps on CV boots. Crank and handle allows for tension to be kept while tightening the clamps during installation.

Made from quality steel construction with powder coated finish.

• 10mm (3/8") maximum band width
• 230mm overall length

This freewheeling adaptor allows vehicles to be moved even with the gearbox / transmission locked. Particularly useful for when the transmission servo module (ISM) fails. For use in workshop only / maximum speed 5 kph.

Simply raise the vehicle / remove either rear wheel / install the adapter (torque to 80Nm). Remount wheel to adapter. Vehicle can then easily be pushed around the workshop.

• Suits BMW (F01 | F02 | F07 | F10 | F11 | F12 | F13 | F25 | F30 | F31 | F32 | F33 | F34) / Mercedes (W164 | W204 | W212 | W221 | W251)
• Black bolts - Mercedes | Silver bolts - BMW
• OEM Equiv:164 589 03 63 00
• Sold individually

A specialised kit for removing / installing seized output CV shafts in wheel hubs. This kit suits many BMW vehicles, but not the E53 X5. For this vehicle, refer ET1253D.

• Applications: E30 | E31 | E32 | E36 | E39 | E46 | E52 | E53 | E60 | E63 | E64 | E65 | E66 | E67 | E83 | E85 | RR1

A specialised tool holds the driveshaft connecting nut. This is designed for use with the ET1653A.

• Engines: N20 | N52 | N54 | N55 | N57 | N63 | S63
• Series: F10 | F25