Cutting edge technology delivers a massive 1,275Nm breakaway torque in a super compact, lightweight tool. Only 92mm long, and weighing less than 1.35kg. Ergonomically designed, with rubber grip. Single handed forward / reverse for easy one handed use. Composite body. Backed by a 24 month warranty.

Ideal for use in tight spaces.

• 1/2" Sq Drv
• Length: 92mm
• Jumbo hammer
• Breakaway torque: 1,275Nm
• Working Torque: 25-320 Ft Lb (34-434 Nm)

This pen-style tool tests the percentage of water in brake fluid and evaluates key chemical profiles essential for modern brake fluids. The updated version now supports five fluid typesÑcovering both traditional DOT variants and ENV (Bosch). Ideal for quick and reliable brake fluid checks.

• Colour coded LEDs indicate percentage of water in the brake fluid
• Compatible with DOT 3 | DOT 4 | DOT 5.1 | ENV4 (Bosch) | ENV6 (Bosch)
• Not suitable for silicone-based DOT 5.0
• AAA Battery included

A specialised kit for removing dust / dirt / rust when reseating ABS sensors. The kit contains 5 reamers, and one drill to suit most European vehilces.

Designed for use with a 1/4" drv flexible ratchet handle (not included).

• M10 x 133mm | VAG, Holden
• M14 x 42.5mm | BMW
• M15 x 33.5mm | Mercedes, Mazda, Toyota, Ford
• M18 x 31.5mm | VAG, BMW (E36 | E46)
• M18 x 42.5mm | VAG, NFZ
• M8 x 180mm Drill | VW T5

A specialised reamer for ABS wheel speed sensors. The fixture hole should be thoroughly cleaned before replacing the sensor.

This 11mm reamer enables precise cleaning of the fixture hole, without expanding the hole diameter / damaging the sensor wheel.

• 11mm diameter reamer
• Applications: VAG, including Golf Gen 6 / 7, Audi A3, Skoda Octavia, SEAT Leon

For Bendix brakes that have a return spring hooking over a post. The socket end removes springs by rotating the hook post off. The opposite end leverages spring onto post.

• Equivalent to Bendix S13P

This file is designed for removing corrosion, road dirt, brake dust etc from calipers / carriers when replacing brake discs / pads. The reverse blade also functions as a scraper for harder to remove residue.

• Flat 155mm parallel blade with diagonal coarse grooves to reduce clogging.
• Extra slim 10mm style, especially useful on Japanese vehicles with narrow caliper carriers.
• Double sided for easy use.

A handy set of three different pairs of brake caliper hooks. These hooks are ideal for hanging components such as brake calipers, coolant hoses, engine cables, fuel lines etc so that they are not damaged during service.

• Small rigid (red coated) hooks - 160mm long x 6mm dia
• Large rigid (red coated) hooks - 210mm long x 8.3mm dia
• Large flexible (green coated) hooks - 210mm long x 8.3mm dia