Packaged in a BMC, this circuit tester has a standard 4mm connector which can be used with standard multimeter probes.

Wire piercer / probes / alligator clip included.

• Not for use with airbags / vehicle computers.
• For use with DC voltage only.

The Power Probe PP3EZ includes all the powerful testing modes and features of the Power Probe III plus now includes 2 new modes - EZ Learning Mode and EZ Diagnostics Mode. The PP3EZ speeds you through the diagnosing of 12 to 24 volt automotive electrical systems. After connecting the PP3EZ's clips to the vehicle's battery, the automotive technician can determine at a glance, the voltage level and the polarity of a circuit without running for a voltmeter or reconnecting hook-up clips from one battery pole to the other. The power switch allows the automotive technician to conduct a positive or negative battery current to the tip for activating and testing the function of electrical components without wasting time with jumper leads.

• New larger LCD screen
• Upside down? No problem! New flip screen feature
• Menu driven. Makes navigating a breeze

A specialised kit of diesel injection line wrenches. These open end 12 point crowsfoot sockets are designed for servicing the union nut on high pressure lines on common rail injection engines.

• 14mm | 17mm | 19mm
• 12 point
• 1/2" Sq Drv

A specialised oil funnel for Ford / Mazda vehicles that connects directly to the oil filler neck, eliminating the risk of unsafe oil spills.

Also fits Citroen Jumper, Fiat Ducato and Peugeot Boxer vehicles.

• 33.5mm diameter connector.
• Engine oil bottles can be put in upside down on the funnel, allowing for hands free / single person operation.
• Large oil passage allows for faster oil flow.
• Lower transparent chamber shows progress of oil flow into engine.

Advanced multi function tester supplied with inter changeable connectors. Voltage supply 8-30V.

A handheld diagnostic tool designed to test circuits / electrical connections.Operates from 3-48V. Includes probe adaptor for testing terminal connections.

An extension cable for the ET0700. Ideal for working on trucks/rear of vehicle.

The perfect electrical circuit test assistant! Get the job done with ease!

Compatible with standard 4 and 5 terminal relay circuits and can be used with most car makes and models. The RelaySim Pro can energise any relay that powers DC electric motors, fuel pumps, cooling fans, blower motors, window motors, and any other motor actuated by a relay), headlights, and other car lighting applications or almost all electrical actuators, such as electromagnetic, electromechanical, and electrohydraulic. Additionally, it can be used in series (in place of a fuse) with most other circuits rated for 25A or less. The device is suitable for both 12-volt and 24-volt systems and does not limit the operating current range. The operating range for continuous usage is up to 21 amps. The device supports a maximum surge of 27 amps, regardless of whether the voltage is 12V or 24V. Two LEDs (85 and 86 terminals) indicate voltage, polarity, and continuity in the relay coil circuit.

RelaySim Pro has a built-in dual high-definition LCD digital display that allows you to observe the current and voltage values in the circuit under test. The device measures the current flowing through the 87 or 87a circuit, depending on which one is currently activated. Also, it measures and displays voltage for circuits 85, 86, 87, 87a, and 30. You can directly observe the amperage and voltage going into an activated circuit, allowing you to assess the load's health. If an actuator is drawing more current than specified, or the current load is inconsistent during operation, the load/actuator is suspect and should be replaced.

• Suits 12V and 24V applications
• Separate control of the 87 and 87a relay circuit
• Integrated a dual high-definition LCD digital display
• Built-in DC ampere meter 0...50A
• Up to 21 amp operating current (for both 12V and 24V applications. See the specs for more details)
• Measurement of the current through the activated circuit
• Built-in DC voltage meter 0...199.9V
• Independent voltage measurement on each relay terminal
• Open load detection in OFF-state
• Flags a fail event (Status LED)

This circuit tester is suitable for use with standard 12V DC systems, as well as newer 42V systems. Safe for low current circuits as it only draws 3 milliamps @ 12V. Crystal clear handle providers excellent all round visibility, even in bright light.

• Automotic voltage identification: 12V (blue LED) | 42V (red LED)
• Two super bright LEDs for excellent visibility in all light conditions.
• Safe for low current circuits

Check circuits on all 6V & 12V systems. 70mm insulated probe, with 3.6m retractable cord.

• 70mm insulated probe
• 3.6m retractable cord