A workshop quality touch control ultrasonic cleaner. This larger size is ideal for cleaning manifolds as well as smaller parts. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 500 x 300 x 200mm
• Dual 33kHz (coarse) / 40kHz (intensive) frequency
• 600W ultrasonic power / 500W heating power
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer (1-99 minutes working time)
• Digital temperature setting (0-80 degrees C range)

Wifi allows for easy connection to phone / PC / scan tool. 360 dgree articuluation. Supports both iOS / Android.

• Narrow 6mm camera
• 1m gooseneck cable
• 1280 x 720px resolution
• Rechargeable battery

Discover the power of precision cleaning with ultrasonic cleaners! These cutting-edge devices use high-frequency sound waves to effortlessly remove dirt, grime, and contaminants from even the most delicate surfaces. Perfect for jewelry, eyeglasses, medical tools, and more, ultrasonic cleaners deliver professional-level results in minutesÑall from the comfort of your home or workspace. Say goodbye to tedious scrubbing and hello to sparkling perfection.

• Die cast 304 stainless steel tank
• 0-80¼C temperature range
• 1-99 minutes working time
• 60W ultrasonic cleaning power
• 40KHz for intensive rinse
• Tank size: 150 x 140 x 100mm
• Tank capacity: 2 litres
• Power supply: 220V / 50Hz

A specialised kit designed to easily / quickly remove heavy duty yokes on drive shafts, rear end differentials and transmission without damaging the yoke or other adjacent components.

• Suitable for yokes with a bearing diameter between 1 7/8" and 2 3/16", including Spicer and Meritor series such as 1610, 1710, 1760, 1810, SPL 140, 170, 250, and Meritor (Rockwell) RPL 20 and 25 series
• Designed for use with 1" Sq Drv impact tools
• Generates over 25,000 pounds of pulling power, making it capable of handling even the most stubborn yokes
• Equivalent to Tiger 10803

A specialised kit for removing dust / dirt / rust when reseating ABS sensors. The kit contains 5 reamers, and one drill to suit most European vehilces.

Designed for use with a 1/4" drv flexible ratchet handle (not included).

• M10 x 133mm | VAG, Holden
• M14 x 42.5mm | BMW
• M15 x 33.5mm | Mercedes, Mazda, Toyota, Ford
• M18 x 31.5mm | VAG, BMW (E36 | E46)
• M18 x 42.5mm | VAG, NFZ
• M8 x 180mm Drill | VW T5

A specialised reamer for ABS wheel speed sensors. The fixture hole should be thoroughly cleaned before replacing the sensor.

This 11mm reamer enables precise cleaning of the fixture hole, without expanding the hole diameter / damaging the sensor wheel.

• 11mm diameter reamer
• Applications: VAG, including Golf Gen 6 / 7, Audi A3, Skoda Octavia, SEAT Leon

For Bendix brakes that have a return spring hooking over a post. The socket end removes springs by rotating the hook post off. The opposite end leverages spring onto post.

• Equivalent to Bendix S13P

This file is designed for removing corrosion, road dirt, brake dust etc from calipers / carriers when replacing brake discs / pads. The reverse blade also functions as a scraper for harder to remove residue.

• Flat 155mm parallel blade with diagonal coarse grooves to reduce clogging.
• Extra slim 10mm style, especially useful on Japanese vehicles with narrow caliper carriers.
• Double sided for easy use.

A handy set of three different pairs of brake caliper hooks. These hooks are ideal for hanging components such as brake calipers, coolant hoses, engine cables, fuel lines etc so that they are not damaged during service.

• Small rigid (red coated) hooks - 160mm long x 6mm dia
• Large rigid (red coated) hooks - 210mm long x 8.3mm dia
• Large flexible (green coated) hooks - 210mm long x 8.3mm dia

For brake caliper guide bolts in the wheel bearing housing (extendable for OPEL Astra G)

A repair set for pulled out / damaged internal threads of brake caliper guide bolts, especially for VW Golf IV, Beetle, Audi A3.

Includes drilling stereotype extends set for Opel Astra G.