Comprehensive kit suits a wide range of small passenger vehicles through light trucks.

Includes 4 injector adapters and a universal injector adapter kit (contained in small box). The clamp-on adapters offer more applications on truck, van, bus, marine, and agricultural machinery.

• Plus gauge assembly, glow plug test adaptors and universal "clamp on" adaptors injector pullers.

An essential diagnostic tool for testing potentially faulty electro mechanical relays. This tool tests both 12V / 24V relays, with four / five pins (not late model Ford 4 pin).

Simply plug the relay into the tester - using 12V vehicle power, the relay will be cycled 10 times with the tester applying a signal to the relay coil while checking the function of the internal contacts. The tester applies load to the internal contacts to detect excessive resistance.

• Quickly test 3 common types of electro mechanical relays
• Test relay coil resistance / relay contacts / cyclic testing
• Relay coil resistance: 20 - 500 Ohms
• Test voltage for coil: 9V
• Contact resistance threshold: 200 milliohms

The SmokeMan ET4396 is a compact, high-performance pressure brake designed for fast, clean, and reliable brake fluid exchange. This unit streamlines brake bleeding, allowing it to be undertaken by one person - no need for a second technician. Powered by the vehicle's own battery - no shop air required!

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.
• Includes premium adaptor kit

Our new updated radiator pressure test kit sets the new industry benchmark!

Faster, easier, and more comfortable to use, than existing kits.

Perform cooling system leak tests, vacuum type coolant refills, and leak tests on radiator caps.

• Updated adaptors (more coverage than older kits) - includes new Volvo Hybrids
• Updated pressure pump, coolant refill and adaptor design
• Faster refill speed - 91 ml / sec vs 37 ml
• Connectors are compatible with superceded adaptor kits

This test performs leak down tests which can be more accurate than normal compression tests.

Leak down tests can be used to detect various engine faults including leakage past rings, head gaskets, intake / exhaust valves etc.

• Requires air source of 70-160PSI, as the unit will pressurise system to 60PSI.
• Spark plus thread hoses: 10, 12, 14mm | regulator & o-rings

This kit contains a special cap, and gauge in order to test oil pressure on a range of BMW engines.

• Engines: N20 | N46 | N55
• OEM equiv: 119250

Easy to read 2-1/2" diameter gauge features colour coded quadruple calibrations. 6" heavy duty stem with universal rubber cone adaptor fits all plug holes. Convenient pressure holding side release valve. Provides an accurate reading on high performance engines.

• 0-300 PSI | 21kg/cm | 21 Bar | 2100kPA
• 13" durable rubber hose with 14mm | 18mm adaptors.

This cylinder leakage kit can diagnose a range of engine faults including blown head gaskets, cylinder head cracks, and worn piston rings / valves.

The twin gauge manifolds shows percentage of cylinder leakage, and cylinder pressure. Suitable for use on petrol engines with 10 | 12 | 14mm spark plugs.

For deeply recessed spark plugs, a long reach compression test adaptor may be required.

• Suitable for use with 10mm / 12mm / 14mm spark plugs.
• Readings: cylinder leakage / cylinder pressure (psi / bar)

Comprehensive set with adaptors to suit most common Asian / European / US vehicles. These connectors are not interchangeable with the ET7191 compression test kit.

• Normal operating range: 750PSI
• Gauge: 0-1,000 PSI

Tests return flow pressure from Bosch | Delphi | Siemens common rail injectors. Suitable for testing Piezo pass / fail statement.

• Gauges: 1-3 Bar & 1-15 Bar.
• Transparent body to check for air pockets / diesel fuel condition.