Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 3-1/2" (98mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Designed to allow the use of an extension / torque wrench to tighten the socket.

• 4-1/8" (105mm) opening | 6 Pt
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Designed to allow the use of an extension / torque wrench to tighten the socket.

• 3-3/4" (95mm) opening | 6 Pt
• 98mm overall length
• 3/4" Sq Drv

Engineered to simplify installation of the rear oil seal on heavy-duty Nissan UD truck crankshafts. Its precision fit ensures the oil seal slides into place without damage, eliminating costly rework or downtime. This installer is designed specifically for UD 350 (CK450) and UD 380 (CK451) models over 20 tons, providing a reliable workshop solution.

• Application: UD 350 (CK450) trucks over 20 tons
• Oil seal genuine: BZ5967E (Seal size: 138mm ID x 173mm OD x 17mm width)

The ET1792A is a specialised tool designed to ensure precise and damage-free installation of the rear crankshaft oil seal on FUSO trucks, specifically models equipped with 4D34 and 6D17 engines. Engineered for professional use, this installer helps maintain seal integrity and prevents costly leaks or premature wear during service.

• Application: Mitsubishi Fuso Canter | Rosa
• Engine codes: 4D33 | 4D34
• Suits genuine oil seal: BZ4603E

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 2-9/16" (65mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 3-1/4" (83mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered 8 point nuts on truck wheel bearing locknuts. Use with extension / torque wrench.

• 3-1/4" (83mm) opening | 8 Point
• 98mm overall length
• 3/4" Sq Drv

Adjustable jaws fit all hexagon (49 - 135mm) & octagon (49 - 143mm) wheel bearing lock nuts. Contains three sets of pins, applicable to any pin holes on the nut.

• 6 Point lock nuts: 1-3/4" - 5-3/4" (49 - 135mm)
• 8 Point lock nuts: 1-3/4" - 5-5/8" (49 - 143mm)
• Pin diameters: 1/4" | 5/16" | 3/8"

This specialised tool locks the drive flange to prevent rotation when servicing the inner drive shaft mounting bolts / hub nuts.

The specially designed plastic wheels wedge between the brake caliper and the drive flange, using the vehicle's own wheel bolts or nuts.

• Allows easy removal of driveshaft / hub fixings.

• One person operation.

A specialised adaptor kit to remove / install front and rear wheel bearings with spindles, on the vehicle. Designed to reduce the chance of damage to the hub and bearing, while saving time. Sleeves fit most standard wheel bearing sizes.

• Suitable for use with impact wrench
• Applications: Mercedes, BMW, VW, Audi, Porsche, Volvo, Toyota, Lexus, Nissan, Infiniti, Honda, Acura