Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 2-9/16" (65mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 2-5/8" (67mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 3-1/2" (98mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 2-9/16" (65mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered 8 point nuts on truck wheel bearing locknuts. Use with extension / torque wrench.

• 3-1/4" (83mm) opening | 8 Point
• 98mm overall length
• 3/4" Sq Drv

Adjustable jaws fit all hexagon (49 - 135mm) & octagon (49 - 143mm) wheel bearing lock nuts. Contains three sets of pins, applicable to any pin holes on the nut.

• 6 Point lock nuts: 1-3/4" - 5-3/4" (49 - 135mm)
• 8 Point lock nuts: 1-3/4" - 5-5/8" (49 - 143mm)
• Pin diameters: 1/4" | 5/16" | 3/8"

This specialised tool locks the drive flange to prevent rotation when servicing the inner drive shaft mounting bolts / hub nuts.

The specially designed plastic wheels wedge between the brake caliper and the drive flange, using the vehicle's own wheel bolts or nuts.

• Allows easy removal of driveshaft / hub fixings.

• One person operation.

A specialised adaptor kit to remove / install front and rear wheel bearings with spindles, on the vehicle. Designed to reduce the chance of damage to the hub and bearing, while saving time. Sleeves fit most standard wheel bearing sizes.

• Suitable for use with impact wrench
• Applications: Mercedes, BMW, VW, Audi, Porsche, Volvo, Toyota, Lexus, Nissan, Infiniti, Honda, Acura

A specialised kit for servicing Gen II wheel hubs / bearings on Ford | Volvo vehicles with 78mm diameter front wheel bearings. These tools ensure that the insertion loads are taken only on the outer race of the bearing. Gen II wheel bearings are a wheel bearing / drive flange that cannot be separated.

Always adequately lubricate threaded force screws and thrust bearings.

• 78mm dia front bearings
• Applications: Ford: Focus II (LS / LT) | C-Max, Mazda: 3 (BK / BL), Volvo: C30 | C70 | S40 | V50