A specialised crankshaft rear oil seal installer for Canter / Iveco Daily / Fiat Ducato / Fuso trucks. Install oil seals safely.

On Iveco / Fiat suits 3.0L diesel engines.

• Engine codes: 4M40 | 4P10 | F1C
• Mitsubishi Canter | Iveco Daily, F1C | Fuso 3.5T (96-16)
• Genuine seals: BH6237E | 68133295AA | 68133295AA | 504014232 | 504180969 | 68133295AA | 0514.E0 | 0514.E3, | 0514.E4 | 0514.E0 | 0514.E3 | 0514.E4 | 353.090
• OEM equiv: MH063963 | MK667209 | 99346259

This crankshaft front oil seal tool is designed specifically to install oil seals on Iveco Daily / Fiat Ducato 3.0L engines.

Refer ET1665 for seal extraction tool.

• Engines: Iveco F1C | Fuso 4P10 Lift cars (Euro 5)
• Application: Daily / Ducato / Fuso Canter
• OEM Equiv: Iveco 99346258 | Fuso MH063962
• Suits OE seal: 68127761AA

A specialised tool for removing the injectors on a range of Fuso / Iveco and Mitsubishi Canters. This tool suits injectors with a 12.5mm inside diameter thread size for the fuel feed line.

• Applications: Fuso Euro 5 | Iveco Daily F1C (Euro 5) | Mitsubishi Canter 4P10

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

The SmokeMan ET4396 is a compact, high-performance pressure brake designed for fast, clean, and reliable brake fluid exchange. This unit streamlines brake bleeding, allowing it to be undertaken by one person - no need for a second technician. Powered by the vehicle's own battery - no shop air required!

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.
• Includes premium adaptor kit

A specialised set of 4 pin lock nut sockets for driving lug lock nuts with external teeth. The kit contains sockets from 20mm - 72mm diameter.

Please refer to the kit components for details of individual sockets.

• 1/2" Sq Drv
• 60mm overall length

The ET2602 is a high-performance digital clamp meter designed for precision electrical measurements in industrial, commercial, and residential environments. Engineered with True RMS technology, it ensures accurate readings even in the presence of distorted waveforms caused by non-linear loads.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• AC / DC Current & Voltage, Resistance, Capacitance, Frequency, Duty Cycle, temperature
• CAT III 600V rating

A versatile tool for holding the camshaft gear when loosening / tightening the centre bolt. The adjustable jaw and replaceable pin sets makes this kit universal in application.

• This kit has been updated with two extra pin sets. These 5mm / 8mm pins are essential to suit late model VAG engines.

A professional advanced breakout box for invehicle diagnostics / bench ECU testing, supporting both 12V / 24V systems.

More than just a basic breakout box - it exposes every OBD-II pin, monitors live voltages (true RMS), provides optional CAN termination, and supports safe, fast hookup of other diagnostic devices.

Key features:

• Universal compatibility: Works seamlessly with both 12V and 24V OBDII systems.
• VRMS Voltage Monitoring In Real Time: LCD displays true RMS voltage on all 16 OBDII pins. Visual feedback shows dynamic signals (green background), and immediately alerts for power / ground issues (pins 4 / 5 / 16)
• Built-In CAN Termination Switch: Applies a 120 resistance across the CAN pair to compensate for missing termination during single-ECU or small bench networks, improving signal integrity and reducing reflections.
• Voltage Protection & Alarm System: Features automatic audible alarms for high/low voltage deviations and reverse polarity protection. Supports a maximum load current of 2A.