Promotion ends in

Promo end date:- 23:59 PM, 31 October 2020

VAG Timing Kit

1.0L | 1.2L | 1.4L TSI / TFSI
SKU: ET1594C

Automotive

$349.00
Low Stock

An updated comprehensive timing kit for late model belt driven petrol VAG engines. This kit includes an updated camshaft locking tool for post 2013 engines with Cylinder On Demand (COD).

For the camshaft holding kit refer ET1872A.

  • Engines: 1.0L 3 Cyl | 1.2L TFSI | 1.4L TFSI / TSI
SKU Description OEM Equivalent Codes
ET1540

VAG Crankshaft Locking Pin

T10340

ET2207-3

VAG Belt Tensioner Locking Pin

T10060/A

T40098

T20167

3204

ET9916

VAG Tensioner Wrench

T10499

TT0477

Camshaft Locking Bar

T10477

TT0476

Camshaft Sprocket Locking Tool 1.0L 4V 3Cyl

T10476

TT0494

Camshaft Locking Tool 1.2L | 1.4L TSi 4 Cyl

T10494

TT0487

Camshaft Fitting Tool 1.2L | 1.4L

T10487

TT0504

Camshaft Positioning Tool

T10504

Engine Code(s)

CHYB, CJZA, CMBA, CXSA, CHPA, CJZC, CPTA, CHZB

Vehicle Make Model Series Engine Code Engine Size Year Start Year End
SkodaOctaviaNECHPA1.4L20132015
VolkswagenGolfMK7CHPA1.4L20122015
VolkswagenUp!AACHYB1.0L20122014
SkodaCitigoAACHYB1.0L20132014
AudiA18XCHZB1.0L20152019
SkodaFabioNJCHZB1.0L2017
SkodaRapidNHCHZB1..0L2018
VolkswagenGolfMK 7CJZA1.2L2016
SkodaFabiaNJCJZC1.2L2015
VolkswagenPoloMK5CJZC1.2L2014
AudiA38VCMBA1.4L20132014
VolkswagenGolfMK7CMBA1.4L20122015
AudiA38VCPTA1.4L20122016
VolkswagenGolfMK7CXSA1.4L20132015
SKU ET1594C
Barcode # 9321280411722
Brand Automotive
Product weight 3.4000kg
Shipping weight 3.430000kg

12 Months

Calculate Shipping



Flat Rate Shipping - $16.50
$16.50 flat rate shipping


Others also bought


Promo
Toyota Rear Hub Socket (3 Pin)

Toyota Rear Hub Socket (3 Pin)

Specialised socket for removing rear hub sockets on Toyota Landcruisers. Special three pin profile, with 15mm slotted grooves.

Heavy duty construction with solid pins that are less likely to break. Other cheaper products use low grade split pins which are more liable to breakage / other shorter product life.

  • OEM Equiv: 09509-25011
  • Required for removing Part # 42427-60021
  • 1/2" Sq Drv

Promo
VAG Rear Crankshaft Oil Seal Installer

VAG Rear Crankshaft Oil Seal Installer

Safely install the PTFE crankshaft seal, flywheel end, on TSI engines only (for seals with oil side sealing lip) (Version B).

  • Engines: 1.8T | 2.0T TSI

NEW
Promo
CarScope AutoSim Pro Master Kit CarScope AutoSim Pro Master Kit

CarScope AutoSim Pro Master Kit

Next generation automotive signal generator - to simulate SENSORS and ACTUATORS.

Quickly detect whether the ECU, a feed, plug in connection, or sensor is defective. Eliminate faults without simply replacing parts on suspicion only.

This master kit contains the ET0098PRO plus the following additional components:

  • Plastic Storage Box with Foam
  • Insulated crocodile clip, Pack of 2 (Red, Black)
  • Back-pinning Probe Set (5 needles)
  • Crocodile Clip, 4 mm, 25 A, Red
  • Crocodile Clip, 4 mm, 25 A, Black
  • Crocodile Clip, 4 mm, 15 A, Blue
  • Pluggable Terminal Block (2-Pin, 5mm)
  • SD card to Micro sd card adapter


More from this category


NEW
Promo
Audi Transmission Sensor Module Connector Tool

Audi Transmission Sensor Module Connector Tool

A specialised tool for removing the sensor module connector on 0B5 transmissions (7 speed DCT with wet clutch). To use, simply connect the socket to the housing, turn anti-clockwise, then remove the connector housing.

  • Applications: 0B5 transmissions
  • Vehicles: Audi A4 (08-) | A5 Cabriolet (09-) | Q5 (08-) | A5 Coupe (08-) | A5 Sportback (08-) | A7 Sportback (11-)
  • OEM Equiv: T40228

NEW
Promo
BMW Air Conditioning Compressor Belt Installer BMW Air Conditioning Compressor Belt Installer

BMW Air Conditioning Compressor Belt Installer

A specialised stretchy belt installer for the air conditioning belt on BMW N62 engines, and the PAS belt on BMW Mini W17 diesel engines.

  • Engine codes: BMW N62 (02-10) | BMW Mini W17 (03-06)
  • OEM Equiv: 641040