A new kit for timing late model chain driven twin camshaft diesel engines. The timing chain on these engines is located on the gearbox side at the rear of the engine.
These engines replace the older N47 | N57 series.
- Applications: B37 | B47 | B57
- OEM Equivalent: 113340 | 116480 |118760 | 2288380 | 2420824 | 2365488 | 2448914


BMW Crankshaft Rotation Socket
A specialised socket for holding the crankshaft pulley while loosening or tightening the middle pulley bolt.
This socket fits over the bolts that hold the cranshaft pulley onto the engine. This allows for the safe rotation of the engine, in a controlled manner.
- Engine codes: M57 | N47 | N47S | N57
- OEM equiv: 116480 (11 6 480)


BMW Crankshaft Rotation Socket
A specialised socket for holding the crankshaft pulley while loosening or tightening the middle pulley bolt.
This socket fits over the bolts that hold the cranshaft pulley onto the engine. This allows for the safe rotation of the engine, in a controlled manner.
- Engine codes: M57 | N47 | N47S | N57
- OEM equiv: 116480 (11 6 480)
SKU | ET1421G |
Barcode # | 9321280420823 |
Brand | Automotive |
Product weight | 2.6000kg |
Shipping weight | 2.600000kg |
Vehicle Make | BMW |
12 Months
Calculate Shipping
Flat Rate Shipping - $16.50
$16.50 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
You may also like

BMW N47 | N47S | N57 | N57S Timing Kit
A specialised timing kit for locking camshafts / crankshafts in place on BMW diesel engines, as listed below. The kit includes fuel pump sprocket retaining tools as well as a crankshaft turning socket.
- Engine codes: N47 | N47S | N57 | N57S
More from this category

BMW / PSA Balance Shaft Locking Kit
A specialised kit for setting the balance shafts on common BMW (4 & 6 cylinder) | Mini | Citroen | Peugeot petrol engine vehicles.
- Engine codes: N42 | N45 | N46 | N46T | N52
- Engine codes: BMW 1.6 (N40 / N45 / N45T, B16, B16A, B16AC) 1.8 / 2.0 (N42 / N46 / N46T) 2.0 / 3.0 (N51 / N52 / N52-Component / N53 / N54), PSA: 1.4 / 1.6 16V (EP3 / EP6 / EP6DT / EP6DTS), Mini 1.4 / 1.6 (N12 / N14)


BMW 2.5L | 3.5L Petrol Timing Kit
A master timing kit for BMW 2.5L | 3.0L petrol engines. This kit is designed to hold the camshafts / crankshafts when working on the timing chain / engine timing.
- Engine codes: N51 | N52 | N52K | N53 | N54 | N55

BMW B38 | B48 | B58 Timing Kit
A specialised timing tool kit for locking camshaft / crankshafts, and setting the crankshaft at TDC.
This kit is suited to the new B series 3 cyl / 4 cyl / 6 cyl engines which have replaced the N20 / N26 engines. Also suits the new Toyota Supra GR (19-)
- Engines: B38 | B48 | B58
- OEM Equiv: 2 358 122 | 2 288 380 | 2 365 488

BMW Camshaft Alignment Timing Kit
A comprehensive kit for setting engine timing / servicing the timing chain on M52 / M54 engines, with double Vanos only.
- Engines: M52TU / M54

BMW Camshaft Carrier Kit
For securing inlet camshaft during installation in bearing bridge. Use in conjunction with ETN62 once heads are removed.
- Engine code: N62 | N73
- OEM Equiv: 11 9 470

BMW Camshaft Locking Kit
The 2.5L & 3.0L 6 cylinder twin camshaft 16 valve petrol engine (04-) are widely used in BMW 3 & 5 series vehicles. There are 2 types of engines within the range, VALVETRONIC & Direct injection engines, but all have VANOS variable valve timing units on both the inlet & exhaust camshafts.
- Engine codes: N52 (2.5L) | N54 (3.0L) DOHC 24V petrol engines