Retains the pump sprocket in position when diesel pump is removed, as the pump sprocket & timing chain remains undisturbed reducing engine disassembly time. Use for 2.5L TDS transverse mounted engines in BMW (E34 | E36 | E38) 1.7L & 2.5L / Holden / Land Rover TD5. Always lubricate forcing screw.
- OEM Equiv: 13 5 120 (135120) | KM-825
Engine Code(s)
M51D25
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Land Rover | Range Rover | M51D25 | 2.5L | 1994 | 2002 |
13 5 120
LRT 12-119
KM 825
BMW Timing Kit
For 2.0 DOHC 16v | 3.0L DOHC 24v (98-) engines. Used for checking and adjusting timing plus removal and installation of camshaft / variable camshaft timing unit. ALSO suits certain Holden | Land Rover | Rover & MG vehicles.
OEM Equivalents & Engine Codes:
- ET1020A: BMW 11 2 300, Holden KM 813, Land Rover LRT 12-108
- ET1388: BMW 13 5 120, Land Rover LRT 12-119, Holden KM 825
- TT3320: BMW 11 3 320, Holden KM 811, Land Rover LRT 12-112
- TT6322: BMW 11 6 322, Land Rover LRT12-173
- TT6320: BMW 11 6 320
- TT3340: BMW 11 3 340, Land Rover LRT 12-172
- TT5180: BMW 11 5 180, Land Rover 12-227
- TT6080: BMW 11 6 080
- TT3360: BMW 11 3 360, Land Rover LRT 12-115, Holden KM 822
- TT5190: BMW 13 5 190
- TT5120: BMW 13 5 120
- TT5191: BMW 13 5 191
- TT5192: BMW 13 5 192
- M47 | M47TU | M51 | M57 | M57TU
JLR Timing Kit
Specialised kit for the 2.5L TDS engine fitted to Range Rover chain driven diesel engines. This engine was also fitted to BMW vehicles, but not vehicles supplied into Australia.
- Application: Range Rover (94 - 02)
- Engine code: M51D25
Engine Code(s)
M51D25
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Land Rover | Range Rover | M51D25 | 2.5L | 1994 | 2002 |
| SKU | ET1388 |
| Barcode # | 9321280328693 |
| Brand | Automotive |
| Product weight | 0.3600kg |
| Shipping weight | 0.360000kg |
| Vehicle Make | BMW |
| Vehicle Make | Land Rover |
12 Months
More from this category
Automatic Timing Belt Tension Adjuster
A specialised tool for adjusting camshaft spur belts which have idler pulleys with pin holes. The pin is designed to grip the centre of the idler pulley and rotate it around its off centre retaining bolt.
Applicable to a range of vehicles including Hyundai | Mitsubishi | Volvo.
- 1/4" Sq Drv
- Pin diameter: 3/16" (3.0mm)
- OEM Equiv: 09244-28000 | MD998767 (T40009)
BMW Adjustable Flywheel Holder
Used to lock the flywheel in place on a range of late model engines, as well as releasing / tightening down bolts on the vibration damper.
Use in conjunction with ET1517A
- Applications: M47T2 | M47TU | M57T2 | M57TU | M67 | N45 | N45T | N46 | N46T | N51 | N52 | N53 | N54 | W17
- OEM Equiv: 11 8 180 | 11 8 182 | 11 8 183
BMW B37 | B38 Crankshaft Front Seal Installer
A specialised crankshaft oil seal installer to prevent damage when installing new oil seals.
- Engines: B37C | B37D | B38A | B38B
- Applications: BMW 1 | 2 | 3 | X1 | X2, BMW MINI Clubman, Countryman
- OEM equiv: 2 357 900 (2357900)
BMW B38 | B48 Actuator Remover
A specialised camshaft VVT actuator wrench, which is designed to be used when replacing actuator seals, or when the camshaft needs to be removed.
The wrench latches onto the the variable valve timing (VVT) actuators to allow quick / safe removal.
- Engines: B38 | B48
- OEM Equiv: 2 360 895 (2360895)
BMW Balance Shaft & Oil Pump Alignment Kit
Oil pump remover / installer kit for BMW vehicles with N20 2.0L petrol engines. Aligns balance shafts / locks drive sprocket, to allow removal / installation of the oil pump and the balance shaft housing.
- OEM Equiv: 11 4 120 | 2 212 825 | 2 318 177
- Engine code: N20
BMW Balance Shaft Alignment Tool
Specialised locking tools for balance shafts found in late model BMW and BMW Mini B47 / B48 engines, and N47 engines.
- Engine codes: B47 | B48 | N47
- OEM Equiv: 2288054 | 118750 | 118790