Use in conjunction with the ET1261B on earlier model 4JJ1 engines. This Isuzu 4JJ1 crankshaft front oil seal installer simplifies the installation of the crankshaft front oil seal.

• Applications: Isuzu 3.5T (4JJ1) before 2012; RT50 (4JJ1), RF10 (4JK1)
• IM number: 5-8840-2821-0

Flanged fully insulated crocodile clips. Compatible with all standard 4mm multimeter plugs.

• IEC 61010 rating: 600V Cat III | 1000V Cat II
• Current rating: 20A
• Double / reinforced insulation
• Made in UK quality

These reels hold 6 metres of highly flexible double skinned silicone cable suitable for use with standard multimeters.

• 1000V CATIII double / reinforced insulation | 20 Amp current rating
• 4mm Straight plug / 4mm Right angle plug
• Fully compliant to IEC 61010-031:2015

A specialised kit for replacing O-ring seals on the bottom of petrol injectors in a range of BMW engines.

This kit includes a small slide hammer which screws onto the top of the injector.

• Applications: N13 | N14 | N18 | N20 | N43 | N54 | N55 | N63 | N73 | S55 | S63 | B38 | B48
• Guide cones: 7.45mm / 7.8mm
• Seating sleeves: 8.9mm (7.8mm) | 9.3mm (8.0mm) | 9.5mm (8.1mm)
• Seating tool: 9.2mm (9.05mm)
• OEM Equiv: 130280 | 130281 | 130282 | 130283 | 130190 | 130192 | 130193 | 130194

Precision meets practicality with the ET1550 Seal Installer Kit, engineered for seamless removal and installation of front crankshaft oil seals across a wide range of BMW engines. Whether you're a professional technician or a dedicated DIYer, this tool ensures a damage-free, factory-grade seal replacement.

• Engine codes: B40 | N42 | N45 | N45T | N46 | N46T | N51 | N52 | N52K | N53 | N54
• OEM Equiv: 11 9 221 | 11 9 222 | 11 9 223 | 11 9 224 | 11 9 231 | 11 9 232 | 11 9 233

The ET1394A is a precision-engineered tool kit designed for the removal and installation of front crankshaft oil seals on a wide range of BMW engines. Built to meet professional standards, this kit ensures a clean, damage-free seal replacement processÑessential for maintaining engine integrity and performance.

• Applications: N40 | N42 | N45 | N45T | N46 | N46T | N52 | N53 | N54
• OEM Equiv: 11 9 220 | 11 9 230

This master kit is a combination of our ET1394A and ET1188C kits. This kit is designed to remove / install the crankshaft front / rear oil seals on a wide range of BMW vehicles.

• Applications: N40 | N42 | N45 | N45T | N46 | N46T | N52 | N53 | N54

The ET1438B is a specialised kit engineered for precise removal and installation of crankshaft front and rear oil seals on a wide range of BMW 4 & 6 cylinder engines from 2009. Designed for professional technicians and workshop use, this kit ensures damage-free seal replacement and optimal alignmentÑsaving time and reducing the risk of costly errors.

• Engines: N40 | N42 | N45 | N45T | N46 | N46T | N52 | N52N | N53 | N54 | N55
• OEM Equiv: 11 9 220 | 11 9 230 | 11 9 235

A master kit for removing installing both front / rear crankshaft oil seals. A time saving kit, that avoids the risk of damage when installing new oil seals.

• Applications: 4 cylinder | 6 cylinder engines
• Engines: N40 | N42 | N45 | N45T | N46 | N46T | N52 | N53. | N54 | N55
• OEM Equiv: 119220 | 119230 | 119235