The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.

The pipe is fitted with insulation that protects the hands against cold air.

• 1/4" BSP inlet
• 1,000mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

A specialised tool for the removal of ball joints on most passenger vehicles. Ideal for compact work areas, or for vehicles where the control arm does not permit the use of fork type spreaders. Made from highly durable drop forged steel.

• Fork opening: 19mm
• Jaw capacity: 15 - 48mm
• Reach: 38mm
• Overall length: 135mm

This tool is designed to remove ball joints from vehicles. Insert between the ball joint and main body. Hammer the tool to loosen or remove the tie rod.

• 17mm opening
• 200mm overall length

This ball joint separator is designed for splitting anti-roll bar mountings, ball joints and track-rod ends in areas with tight spaces, especially on vehicles such as BMW, Ford, Mercedes Benz, Mitsubishi, VAG group etc.

This ball joint separator is designed with a replaceable sleeve which can be purchased separately.

• 21mm

This ball joint separator is designed for splitting anti-roll bar mountings, ball joints and track-rod ends in areas with tight spaces, especially on vehicles such as BMW, Ford, Mercedes Benz, Mitsubishi, VAG group etc.

This ball joint separator is designed with a replaceable sleeve which can be purchased separately.

• 24mm

• Applications: BMW E46, Mercedes W168 | W211 | W220

Used on most vehicles to remove the ball joint from the steering knuckle. Constructed of drop forged steel for lasting durability.

Use with hammer to separate parts with ease.

• Opening: 15/16" (24mm)
• 300mm length