Bluetooth Clamp Meter with Multimeter & Oscilloscope Functions

Connect up to three clamp meters to a single Bluetooth app! Ideal for diagnosing 3-phase EV motors. Offers advanced measurement capabilities with multimeter and oscilloscope functions, plus convenient data management features.

• Bluetooth Connectivity - Link up to 3 meters for simultaneous monitoring
• Rechargeable Battery - Long lasting power for field use
• 2.8" LCD Display - Clear, high resolution readout
• 38mm Jaw Opening - Suitable for large conductors
• Measurement Range:
• 1,000V AC/DC
• 1,000A AC/DC
• Resistance, Capacitance, Frequency, Duty Cycle
• Oscilloscope - 1 channel, 1kHz bandwidth, 5.0MSa/s sampling rate
• Data Features - Read offline recordings, view data charts, share recordings, and set threshold alarms for proactive diagnostics

A specialised tool for the removal of ball joints on most passenger vehicles. Ideal for compact work areas, or for vehicles where the control arm does not permit the use of fork type spreaders. Made from highly durable drop forged steel.

• Fork opening: 19mm
• Jaw capacity: 15 - 48mm
• Reach: 38mm
• Overall length: 135mm

This tool is designed to remove ball joints from vehicles. Insert between the ball joint and main body. Hammer the tool to loosen or remove the tie rod.

• 17mm opening
• 200mm overall length

This ball joint separator is designed for splitting anti-roll bar mountings, ball joints and track-rod ends in areas with tight spaces, especially on vehicles such as BMW, Ford, Mercedes Benz, Mitsubishi, VAG group etc.

This ball joint separator is designed with a replaceable sleeve which can be purchased separately.

• 21mm

This ball joint separator is designed for splitting anti-roll bar mountings, ball joints and track-rod ends in areas with tight spaces, especially on vehicles such as BMW, Ford, Mercedes Benz, Mitsubishi, VAG group etc.

This ball joint separator is designed with a replaceable sleeve which can be purchased separately.

• 24mm

• Applications: BMW E46, Mercedes W168 | W211 | W220

Used on most vehicles to remove the ball joint from the steering knuckle. Constructed of drop forged steel for lasting durability.

Use with hammer to separate parts with ease.

• Opening: 15/16" (24mm)
• 300mm length