New radiator pressure test adaptors designed for Tesla vehicles. Part of the Endeavour Tools range of radiator pressure test equipment.

This cap is not included in the ET1039C master test kit.

• Tesla (3/S & X/Y)

• MG (STD / EV)

A new aluminium radiator pressure test adaptor designed for Fiat 500E vehicles. Part of the Endeavour Tools range of radiator pressure test equipment.

This cap is not included in the ET1049 master test kit.

• Applications: Fiat 500e | Alfa Romeo Tonale | Chrysler Pacifica / Voyager 3.6L | Jeep Cherokee / Wrangler 3.6L | RAM 1500 3.6L

OE level diagnosis - full vehicle scan / full service functions. Ideal for older vehicles where a code reader won't work.

One vehicle brand (eg BMW) supplied free. Additional brands - $190 each.

Advanced functions include bi-directional component actuations and module coding.

• USB updates (no micro SD)
• Free lifetime updates
• Perfect for scanning old OBDI vehicles
• Click here for function search

FoxAssist Update Tool

The new SmokeMan smoke machine is the perfect diagnostic tool for testing for engine, coolant or exhaust leaks.

Filling the cavity with pressured smoke allows you to see where there may be leaks under simulated engine conditions.

• Under 10-second heat up time
• Up to 11.5PSI max pressure
• Inbuilt compressor - no airline needed
• Accessory kit for universal connection to most light vehicles
• 12 month warranty

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.

A comprehensive tool set for removing alternator freewheel pulleys on a range of Bosch / Magneti Marelli type alternators.

This kit suits a wide range of vehicles including Audi | BMW | Fiat | Ford | Mercedes | Renault | Seat | VW.

• Includes Sockets: M10 Spline | T50 Torx (Bosch) | Bits: Hex - 8mm & 10mm | Spline - M8 & M10 | Torx T40 & T50
• 2x adaptors for Bosch / Magneti Morelli alternators a 1/2" Sq Drv >> hex adaptor, and 2x pulley connectors

A specialised crankshaft seal installation tools, for certain Audi V6 / V8 engines, to renew the PTFE crankshaft seal.

• OEM equiv: T40048A

A specialised 7 point Ribe socket for removing the radial mounting bolts on Audi RS ceramic brake calipers. These bolts are used on RSQ8 4M ceramic brake calipers on RS6 | RS8 vehicles.

• 7 Pt ribe socket
• 16mm dia x 50mm long
• 1/2" Sq Drv
• OEM equiv: 4M8615107C

A time saving tool to check the timing chain stretch on BMW and BMW MINI engines without dismantling the engine.

• Applications: BMW and MINI engine: 1.4, 1.6, 2.0 and 3.0L.
• Engine codes: N12, N13, N16, N18, N47 and N57 (petrol and diesel variants).
• OEM Equiv: 2 353 281 (2352281)

A specialised tool for removing / installing the rear springs on BMW E70 / E71 vehicles without the automatic ride height option.

• Applications: BMW E70 (X5) / E71 (X6)
• OEM equiv: 335 100 (335100)