Professional quality power bits (10 pack) with a Torx Tamperproof profile ideal for security screws commonly found in automotive, machinery and security installations.

This bit is made from premium quality A2 steel for durability and long service life, and is magnetised.

Suitable for use with power tools and bit holders.

• Torx (Sec) T-20H Power bit
• 1/4" hex drv
• 50mm overall length
• 10 pack

The ET2602 is a high-performance digital clamp meter designed for precision electrical measurements in industrial, commercial, and residential environments. Engineered with True RMS technology, it ensures accurate readings even in the presence of distorted waveforms caused by non-linear loads.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• AC / DC Current & Voltage, Resistance, Capacitance, Frequency, Duty Cycle, temperature
• CAT III 600V rating

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display

These roll head (Lady Foot Type) pry bars are fully forged from Chrome Steel, are hardened (38-43 HRC) and tempered.

Specifically designed for heavy prying and fulcrum prying in automotive applications.

The tapered end is useful for aligning applications.

• Sizes: 6" (150mm) | 12" (300mm) | 16" (400mm) | 20" (500mm)
• 4 pce set

Specialised adaptor cap to connect to the cooling system expansion tank for leak pressure testing. This cap is suitable for late model Haval vehicles, including petrol engine and hybrid models.

• Applications: Haval H6 | H9 | Jolion
• M63 x P4.0

Radiator test caps for major Chinese car makes, including BYD, Chery, Geely, GWM, Haval, LDV, and MG. Made with high quality and sturdy nylon materials.

Caps connect with a pressure pump (not included - ET1039-1) for leak tests. Or connect to a vacuum tool (not included - ET1039-PURGE) for coolant refill.

Specialised adaptor cap to connect to the cooling system expansion tank for leak pressure testing. This cap is suitable for late model BYD vehicles, including hybrid and battery electric models.

• Applications: BYD Atto 3 | Dolphin | E6Y | Seal
• M33.6 x P3.0 internal thread

A radiator pressure tester is one of the fastest ways to identify cooling system leaks - but it can only deliver accurate results when paired with the correct vehicle-specific test cap. This radiator pressure test adaptor is designed for MG electric vehicles, to be connected on recovery tank filler necks. Part of the Endeavour Tools range of radiator pressure test equipment. This is an optional cap, and not included in our ET1039C master kit.

• Suitable for battery and Smart Electric Drive System (EDS) coolant expansion tanks on MG vehicles
• M52 x 3.0

Specialised adaptor cap to connect to the cooling system expansion tank for leak pressure testing. This cap is suitable for late model Haval vehicles, including petrol engine and hybrid models.

• Applications: Haval H6 | H9 | Jolion
• M63 x P4.0

Our new updated radiator pressure test kit sets the new industry benchmark!

Faster, easier, and more comfortable to use, than existing kits.

Perform cooling system leak tests, vacuum type coolant refills, and leak tests on radiator caps.

• Updated adaptors (more coverage than older kits) - includes new Volvo Hybrids
• Updated pressure pump, coolant refill and adaptor design
• Faster refill speed - 91 ml / sec vs 37 ml
• Connectors are compatible with superceded adaptor kits

A specialised radiator test cap for post 2015 Hyundai / Kia vehicles. Part of the Endeavour Tools range of specialised radiator test adaptors.

This cap is designed to be used with the ET1039 radiator adaptor test kit.

• Applications: Hyundai Elantra (16-19), i30 (16-19), Ioniq 1.6L GDI (from 2016), Kona 1.0L & 1.6 GDi (from 2017), Kona EV (from 2017), Tucson 1.6 GDi & 1.7 CRDi (from 2015), Veloster (2019) | Kia Picanto 1.0L GDI (17-), Sportage (17-18)
• Suits OEM cap: 25330-D3000

This radiator test cap suits N14 engines fitted to BMW Mini vehicles since 2008. This cap is a screw on type.

• Engines: N12 (08-10) | N14 (08-)
• M45 x 3.0 thread
• Suits Volvo 31368311 expansion tank cap