A new radiator pressure test adaptor designed for Tesla vehicles. Part of the Endeavour Tools range of radiator pressure test equipment.

This cap is not included in the ET1039C master test kit.

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display

Compatible with standard radiator pressure test kits for testing cooling system integrity.

Special caps designed to suit Australian delivered MG models for pressure testing the cooling system.

• Applications: ZS, ZS-T, GS, HS, MG3, MG5

Specialised adaptor cap to connect to the cooling system expansion tank for leak pressure testing. This cap is suitable for late model Haval vehicles, including petrol engine and hybrid models.

• Applications: Haval H6 | H9 | Jolion
• M63 x P4.0

Radiator test caps for major Chinese car makes, including BYD, Chery, Geely, GWM, Haval, LDV, and MG. Made with high quality and sturdy nylon materials.

Caps connect with a pressure pump (not included - ET1039-1) for leak tests. Or connect to a vacuum tool (not included - ET1039-PURGE) for coolant refill.

Specialised adaptor cap to connect to the cooling system expansion tank for leak pressure testing. This cap is suitable for late model BYD vehicles, including hybrid and battery electric models.

• Applications: BYD Atto 3 | Dolphin | E6Y | Seal
• M33.6 x P3.0 internal thread

A coolant pressure test adaptor designed for MG electric vehicles. Connect to the coolant recovery tank expansion neck. Part of the Endeavour Tools range of radiator pressure test equipment.

This cap is not included in the ET1039C master test kit.

• Suitable for battery and Smart Electric Drive System (EDS) coolant expansion tanks on MG vehicles
• M52 x 3.0

Specialised adaptor cap to connect to the cooling system expansion tank for leak pressure testing. This cap is suitable for late model Haval vehicles, including petrol engine and hybrid models.

• Applications: Haval H6 | H9 | Jolion
• M63 x P4.0

Our new updated radiator pressure test kit sets the new industry benchmark!

Faster, easier, and more comfortable to use, than existing kits.

Perform cooling system leak tests, vacuum type coolant refills, and leak tests on radiator caps.

• Updated adaptors (more coverage than older kits) - includes new Volvo Hybrids
• Updated pressure pump, coolant refill and adaptor design
• Faster refill speed - 91 ml / sec vs 37 ml
• Connectors are compatible with superceded adaptor kits

A specialised radiator test cap for post 2015 Hyundai / Kia vehicles. Part of the Endeavour Tools range of specialised radiator test adaptors.

This cap is designed to be used with the ET1039 radiator adaptor test kit.

• Applications: Hyundai Elantra (16-19), i30 (16-19), Ioniq 1.6L GDI (from 2016), Kona 1.0L & 1.6 GDi (from 2017), Kona EV (from 2017), Tucson 1.6 GDi & 1.7 CRDi (from 2015), Veloster (2019) | Kia Picanto 1.0L GDI (17-), Sportage (17-18)
• Suits OEM cap: 25330-D3000

This radiator test cap suits N14 engines fitted to BMW Mini vehicles since 2008. This cap is a screw on type.

• Engines: N12 (08-10) | N14 (08-)