A radiator pressure tester is one of the fastest ways to identify cooling system leaks - but it can only deliver accurate results when paired with the correct vehicle-specific test cap. This radiator pressure test adaptor is designed for MG vehicles (Not EV), to be connected on recovery tank filler necks. Part of the Endeavour Tools range of radiator pressure test equipment. This is an optional cap, and not included in our ET1039C master kit.

• Applications: MG HS | ZS | MG4

The ET2602 is a high-performance digital clamp meter designed for precision electrical measurements in industrial, commercial, and residential environments. Engineered with True RMS technology, it ensures accurate readings even in the presence of distorted waveforms caused by non-linear loads.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• AC / DC Current & Voltage, Resistance, Capacitance, Frequency, Duty Cycle, temperature
• CAT III 600V rating

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display

Specialised adaptor cap to connect to the cooling system expansion tank for leak pressure testing. This cap is suitable for late model BYD vehicles, including hybrid and battery electric models.

• Applications: BYD Atto 3 | Dolphin | E6Y | Seal
• M33.6 x P3.0 internal thread

Specialised adaptor cap to connect to the cooling system expansion tank for leak pressure testing. This cap is suitable for late model Haval vehicles, including petrol engine and hybrid models.

• Applications: Haval H6 | H9 | Jolion
• M63 x P4.0

The ET8626 is a professional battery and charging-system tester designed for fast, accurate assessment of all 12V automotive lead acid cranking batteries - including modern stop-start types, and for evaluating 12V and 24V alternator and starting system performance. This tester delivers clear, reliable diagnostics in seconds, and the built-in thermal printer allows you to produce instant test reports for customer records or workshop documentation.

• Compatible With All Major Battery Standards - accurately tests batteries across all common industry standards, ensuring reliable results whether you're working with automotive, commercial, marine, or deep cycle 12V batteries.
• High Load Voltage Testing for 12V & 24V Systems - maximum load voltage tests on both 12 volt and 24 volt electrical systems, making it suitable for cars, trucks, machinery, and mixed fleet applications.
• Built In Short Circuit & Reverse Polarity Protection - integrated safety features to prevent damage to the tester and the battery, even if connections are made incorrectly.
• Wide 100–2,000 CCA Testing Range - enabling accurate assessments of everything from small passenger batteries to heavy duty commercial units.

The SmokeMan ET4396 is a compact, high-performance pressure brake designed for fast, clean, and reliable brake fluid exchange. This unit streamlines brake bleeding, allowing it to be undertaken by one person - no need for a second technician. Powered by the vehicle's own battery - no shop air required!

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.
• Includes premium adaptor kit

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

Professional quality tester for late model trucks fitted with 7 pin type sockets. These testers are designed for testing the vehicle side socket, not the trailer itself.

There are 2 versions - for either 24N / 24S sockets.

• CANbus compatible.
• 4m cable to allow the unit to be used in the cabin.

Professional quality tester for late model trucks fitted with 7 pin type sockets. These testers are designed for testing the vehicle side socket, not the trailer itself.

There are 2 versions - for either 24N / 24S sockets.

• CANbus compatible.
• 4m cable to allow the unit to be used in the cabin.

Achieve perfect torque every time with this versatile and reliable torque adapter. The ET1234 Torque Adapter is a precision tool designed to prevent over-tightening of delicate components, such as plastic and aluminum oil filter canisters and filters, and sump plugs etc. It converts any 3/8" drive ratchet or breaker bar into a 25 Nm torque wrench, ensuring accurate tightening to manufacturer specifications.

• Accurate Torque Control: Converts any 3/8" drive ratchet or breaker bar into a precise 25 Nm torque wrench. Protect components from damage caused by over tightening.
• Durable Construction: Built with high-quality materials to ensure long-lasting performance.
• User-Friendly Design: Simple to attach and use with a 3/8" drive tool.
• Not for use with impact / pneumatic tools.