Innovative design! Works as a 3 jaw puller, and 3 way bearing separator.
Features a selection of extension rods depending on reach required. Use with supplied 10T ram or manual forcing screw.

• Working length up to 500mm
• Bearing size: 50-75mm tapered applications
• Gear puller size: <110mm
• Puller leg reach: 160mm

A specialised set of Torx Plus bit sockets / impact sockets. Torx Plus fasteners are widely used in the automotive sector, and have a six lobe design, but with a different geometry than standard Torx sockets.

This kit contains 13 sockets from size TP10 - TP80, including TP50 / TP55 which are used with late model Subaru engines.

• 3/8" Sq Drv: TP10 | TP15 | TP20 | TP25 | TP27 | TP30 | TP40 | TP45 | TP50, 1/2" Sq Drv: TP55 | TP60 | TP70 | TP80
• 48mm overall length

A manual type vacuum pump for extracting engine oil (and ATF / coolant) etc. Includes a 5.6mm OD suction probe which fits most dipstick tubes.

This kit is NOT suitable for extracting petrol / diesel fluids, as the sealants used in this kit are not fuel / solvent resistant.

• 6 litre tank capacity
• Plastic base to step on to stabilise the tank while pumping
• Conical pour spout for spill free waste oil discharge

Made from drop forged alloy steel, hardened and chrome plated. Sharp edges for easy placement behind the part

• 105 - 150mm capacity
• 5/8" x 11 TPI thread
• 260mm bolt length

Made from drop forged alloy steel, hardened and chrome plated. Sharp edges for easy placement behind the part

• 30 - 50mm capacity
• 3/8-16 UNC thread

Made from drop forged alloy steel, hardened and chrome plated. Sharp edges for easy placement behind the part

• 50 - 75mm capacity
• 3/8" thread

Made from drop forged alloy steel, hardened and chrome plated. Sharp edges for easy placement behind the part

• 75 - 105mm capacity
• 1/2" thread
• 200mm bolt length