A professional quality industrial thermometer that can read up to 850 degrees celsius.

This thermometer is designed for industrial use and is not suitable for body temperature measurement.

• Automatic data hold / max temp display
• Battery included
• -50 to 850 degree C range

Essential test leads. Potentiometer | piercing probes | crocodile | flat terminals | signal tester and more.

• Potentiometer (variable resister) (1x)
• Signal tester / LED stroboscope (2x)
• Piercing probes (green / yellow)
• Test probe extension (2x)
• SRS (airbag) connector (1x)
• Crocodile clip adaptors (2x)
• Needle probes (4x)
• DMM test leads (2x)
• Banana plug extensions (4x)
• Flat terminals (8x)

Extra long double box wrench set designed for accessing hard to reach areas. Mirror chrome finish. Made from durable 6140 alloy steel.

Contains six imperial size wrenches.

• 1/4 x 5/16
• 3/8 x 7/16
• 1/2 x 9/16
• 5/8 x 11/16
• 3/4 x 7/8
• 13/16 x 15/16

Soda blasting delivers a fast, powerful, and non abrasive way to remove paint, carbon buildup, surface rust, and more - making it an ideal choice for anyone who wants professional quality results without the risk of damage. Unlike harsher blasting methods, soda media won’t heat or distort sheet metal and is gentle enough to clean around glass, rubber, and plastic with confidence. Bicarbonate soda media is eco friendly, clean to use, and safe, making it perfect for workshops, restorers, and DIY users alike. As with any blasting process, airborne dust can be harmful if inhaled, so always use P2 respirator protection, along with suitable eye, face, and hearing protection.

The Air Boy soda blaster is designed for small jobs, and features a specially designed nozzle that does not require adjustment. For optimal performance, pair this kit with an air compressor rated at 180 L/min or higher, and install a water trap to ensure smooth, uninterrupted media flow. Replacement soda media (124320100) is readily available, so you can keep blasting without downtime.

• Precision Engineered Nozzle for Consistent Results - delivers an accurate, controlled blasting stream with no manual adjustments needed, ensuring smooth operation and professional quality finishes every time.
• Optional Wide Pattern Nozzles for High Speed Coverage
  - Compatible with wider nozzles (sold separately), allowing users to increase surface coverage and reduce blasting time—perfect for larger jobs or workshop efficiency.
• Mandatory Use of P2 Respiratory Protection - always wear P2 rated respiratory protection to safeguard against fine airborne particles during use, ensuring safe operation in workshop and on site environments.
• Supplied with 1kg of bonus sodablasting media to get you started. Use with a 180L / min or higher air compressor for optimal results.

The SmokeMan smoke machine is the perfect diagnostic tool for testing for engine, coolant or exhaust leaks.

Filling the cavity with pressurised smoke allows you to see where there may be leaks under simulated engine conditions.

Save time finding the leaks, fixing the correct areas and book more jobs with visual evidence of problems.

• Compact design / weighs under 2kg
• Under 10-second heat up time
• 5min auto stop enough for most diagnosis which can be cancelled or trigger another cycle
• Overheat protection
• Smoke is harmless and dense
• Replacement intake bladders available
• Detachable smoke hose and power cord
• Hook for hanging on the bonnet
• Up to 11.5PSI max pressure and 5LPM flow rate
• Inbuilt compressor - no airline needed
• Accessory kit for universal connection to most light vehicles
• 12 month warranty

A specialised thin wall, deep socket for removing / installing the front strut mounting nuts on Tesla Model 3 vehicles.

• Allows the removal of the front strut assembly from the shock tower, without needing to remove the front upper control arm mount).
• Thin wall design, with spring loaded magnet.
• 13mm dia | 6 point | 3/8" Sq Drv

Made from drop forged alloy steel, hardened and chrome plated. Sharp edges for easy placement behind the part

• 105 - 150mm capacity
• 5/8" x 11 TPI thread
• 260mm bolt length

Made from drop forged alloy steel, hardened and chrome plated. Sharp edges for easy placement behind the part

• 30 - 50mm capacity
• 3/8-16 UNC thread

Made from drop forged alloy steel, hardened and chrome plated. Sharp edges for easy placement behind the part

• 75 - 105mm capacity
• 1/2" thread
• 200mm bolt length

For use with ET0711 kit. When used with a 3 jaw puller, provides equal pulling force distributed at 3 supporting joints.

• Spread: 50 - 105mm