This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

An essential set of 18 keys for draining sumps, axles, gearboxes, differentials etc. 3/8" Sq Drv.

• Hex: 8, 9, 10, 12, 14, 17mm
• Square: 7, 8, 10, 11, 12, 13, 14mm
• Square: 5/16" (male), 3/8" (male) | 10mm (female)
• Spline (Sec): M16
• Triangular: 10mm

High speed / small body die grinder for demanding industrial applications where there is restricted access. Throttle lever with safety lock. Rear exhaust. Compact / lightweight / ergonomic design with made in Japan quality.

• Collet size: 1/4"
• Free speed: 25,000 RPM
• Air Consumption: 2.7CFM
• Optional collets: 1/8" | 3mm | 6mm

The Power Probe Temperature Kit is designed to give readings for ambient temperature and from the wireless Temperature Probe.

The Tempkit has a built-in temperature sensor in the base unit, plus a temperature sensor in the remote wireless Probe. This allows for multiple readings simultaneously.

One additional wireless Temperature Probe (TEMPPROBE) is available separately, for a second temperature reading.

• Measuring Range: -22°C to 70°C
• Wireless Transmitter Distance: 5m (16.5 Feet)
• Accuracy ±2.0°F(±2.0°C)
• Backlit LCD Display
• Requires 2x AA and 2x AAA Batteries (NOT INCLUDED)

Quickly find leaks in both engine and turbo systems. Built in air compressor / light weight / powered from 12V battery.

• Pressure range: 0.5 - 17 PSI (adjustable)
• Use with supplied fluid (50ml), or optional dyes
• 12 month warranty
• Built in air compressor!
• Includes accessory kit!

Convert your Android scan tool into a professional battery tester! Or use with your mobile phone / tablet. Easily send test reports by email.

• Works with all common automotive batteries including AGM / GEL / Lithium.
• Professional tester showing battery status, charging / cranking tests, and voltage monitoring for deep analysis.

Made from drop forged alloy steel, hardened and chrome plated. Sharp edges for easy placement behind the part

• 105 - 150mm capacity
• 5/8" x 11 TPI thread
• 260mm bolt length

Made from drop forged alloy steel, hardened and chrome plated. Sharp edges for easy placement behind the part

• 30 - 50mm capacity
• 3/8-16 UNC thread

Made from drop forged alloy steel, hardened and chrome plated. Sharp edges for easy placement behind the part

• 50 - 75mm capacity
• 3/8" thread

For use with ET0711 kit. When used with a 3 jaw puller, provides equal pulling force distributed at 3 supporting joints.

• Spread: 50 - 105mm