This timing tool kit includes all components required to set and hold the camshafts, crankshaft and chain tensioner components when replacing the cam chain on Holden 2.0L | 2.4L turbo twin cam petrol engines.
- Engine codes: A24XE, A24XF, LDK, LE5, LE9, LHU, LTG
- OEM Equiv: KM955, EN-45027, EN-49212, EN-43653, EN-48953
| SKU | Description | OEM Equivalent Codes |
|---|---|---|
| TT0955 |
Tensioner Retaining Pin 2.5mm |
KM 955 |
| TT0955-1 |
Tensioner Retaining Pin 4.0mm |
KM 955-1 |
| TT8585 |
Crankshaft Pulley Alignment Tool |
EN-48585 |
| TT5027 |
Tension Plunger Reset Tool |
EN-45027-1 J-45027-1 |
| TT0272 |
Tension Plunger Holder |
J45027-2 EN45027-2 EN-45027 |
| TT2121 |
Camshaft Locking Tool LHS |
EN-49212 EN-49212-1 |
| TT2122 |
Camshaft Locking Tool RHS |
EN-49212 EN-49212-2 |
| TT3653 |
Flywheel Holding Tool |
EN-43653 J43653 |
| TT8953 |
Camshaft Adjuster Holding Tool |
EN-48953 |
Engine Code(s)
LE9, A20NFT, LTG, A24XE, LE5, 20NFT
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Holden | Astra | PJ | 20NFT | 2.0L | 2015 | |
| Holden | Astra | PJ | A20NFT | 2.0L | 2013 | 2013 |
| SAAB | 9-5 | A20NFT | 2.0L | 2011 | ||
| Holden | Insignia | GA | A20NFT | 2.0L | 2012 | 2013 |
| Holden | Captiva | C140 | A24XE | 2.4L | 2012 | |
| Holden | Captiva | CG | LE5 | 2.4L | 2011 | 2012 |
| Holden | Malibu | EM | LE9 | 2.4L | 2013 | 2017 |
| Holden | Captiva | CG | LE9 | 2.4L | 2012 | |
| Holden | Calais | ZB | LTG | 2.0L | 2017 | |
| Holden | Commodore | ZB | LTG | 2.0L | 2017 | |
| Holden | Equinox | EQ | LTG | 2.0L | 2017 |
| SKU | ET0108 |
| Barcode # | 9321280378360 |
| Brand | Automotive |
| Product weight | 2.6000kg |
| Shipping weight | 2.600000kg |
| Vehicle Make | Holden |
12 Months
Calculate Shipping
Flat Rate Shipping - $19.25
$19.25 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
Others also bought
DA1836 Promo
Heat Shrink Terminal Kit (126 Pce)
- 3:1 Shrink ratio
- Butt connectors
- Ring / spade terminal
- Male / female disconnector
Strut Nut Socket Set (5 Pce)
12 point sockets with cut away profile for servicing strut nuts. These five sockets cover most sizes required for European vehicles.
The cut away design allows access for a hex key to hold the strut while tightening the nut to the specified torque with a torque wrench (hex key is not supplied).
- Sizes: 18 | 19 | 21 | 22 | 24mm
- 1/2" Sq Drv
Power Probe Digital Clamp Meter
The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.
Supplied with 3x AAA batteries.
- Voltage: AC 600V | DC 600V
- Current: AC 80A | DC 80A
- Display 4000 counts
- Jaw Opening 24mm/0.9"
- Auto & Manual Ranging
- Auto Power Off / Non-Contact Voltage Detector
- Diode Open Voltage 3.2V
- Continuity Buzzer <50
- Data Hold
- Large LCD Display Backlight
- Work Light
- Low Battery Display
More from this category
Colorado Master Timing Kit
This kit combines our two individual kits for the pre 2012 / post 2012 engines on Holden Colorado vehicles.
This kit also suits popular Jeep 2.8L turbo diesel engines.
- Applications: Holden Colorado (Series 1 & 2) | Chrysler Grand Voyager (08>) | Dodge Nitro (07-10) | Jeep Wranger (08-)
- Engine codes: LWH | LWN
Fiat 1.3 JTD | 1.3 CDTi 16v Timing Kit
This timing kit is designed for the 1.3L 16V double camshaft diesel engine which is used in a wide range of vehicles including Alfa, Fiat, Ford, Holden and Suzuki.
The chain drive connects to the cranshaft to the camshaft output which in turn is connected by the gear to the camshaft input.
- Engine codes: 169A1.000 | 199A3.000
Fiat 1.6L | 1.9L | 2.4L JTD Timing Kit
Maintains correct valve timing while servicing cam belt or rebuilding the cylinder head. Suits popular 1.9L - 2.4L JTD SOHC / DOHC Multijet diesel engines on Fiat, Alfa Romeo, as well as some Holden engines.
Holden / Renault Timing Kit
A comprehensive kit for the 2.2L | 2.5L DCi diesel belt, chain and gear driven engines. These engines are also used in Renault vehicles, along with some Nissan light commercial vehicles.
- Applications: Holden Movano, Renault Espace, Laguna, Master (X70)
- Engine codes: G9U | G9T
Holden / SAAB 2.5L - 3.2L Timing Kit
A professional timing kit for locking camshaft / crankshafts in position when servicing the timing belt on older model Holden vehicles.
- Applications: SAAB 900 | 9000, Holden Opel | Vectra
- OEM equiv: KM800-1 | KM800-2 | KM800-3 | KM800-4 | KM800-5
Holden | Jeep 2.8L CRD Timing Kit
Comprehensive timing kit for Chrysler / Jeep vehicles with 2.8L VM Turbo diesel engine. Also first generation Holden Colorado (12-13).
For 2014 onwards Holden Colorado vehicles, please refer to ET4371.
- Engine codes: ENS | LWH