An essential set of 18 keys for draining sumps, axles, gearboxes, differentials etc. 3/8" Sq Drv.

• Hex: 8, 9, 10, 12, 14, 17mm
• Square: 7, 8, 10, 11, 12, 13, 14mm
• Square: 5/16" (male), 3/8" (male) | 10mm (female)
• Spline (Sec): M16
• Triangular: 10mm

A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

The legendary driveway tyre inflator for Australian conditions - is now also available in a digital model. This digital model is suitable for inflating truck tyres.

Repair kit available 124MK3-RK

• Extremely robust aluminium body with protective rubber bumper - Long accurate life expectancy
• Small 'stubby' body is the lightest metal bodied digital inflator on the market - Easy to use with reduced fatigue
• Slimline biomorphic body shape gives increased comfort for the user - Fast to use and handle
• Higher pressure range for multiple applications 4 - 250 psi range (including trucks) - Versatile and flexible saving time and money
• Permanently backlit in use, auto off after 25 seconds no-use - Easy to read in dark workshops or at night - Increased flexibility saving cost and time
• Large screen and clear digits - Easy and quick to read - Increasing accuracy and speed of use
• IP54 - can be used indoors and outdoors, saving time and increasing service
• Individually tested and certified against national approved gauges - Guaranteed accuracy
• Long battery life - 400 hours of use - Replaceable 2 X AAA batteries power unit (supplied)
• 3 units of calibration toggle as standard - psi, bar & kPa
• 2 second button hold for calibration toggle
• Registered Design

A workshop quality touch control ultrasonic cleaner. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. 40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 240 x 140 x 100mm
• 120W ultrasonic power / 100W heating power
• Supplied with metal basket
• Stainless steel tank
• Digital timer
• Digital temperature setting

Quickly find leaks in both engine and turbo systems. Built in air compressor / light weight / powered from 12V battery.

• Pressure range: 0.5 - 17 PSI (adjustable)
• Use with supplied fluid (50ml), or optional dyes
• 12 month warranty
• Built in air compressor!
• Includes accessory kit!

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force

• Non sparking / non marring
• Face diameter: 55mm
• Face length: 110mm
• 350mm overall length
• 1.05kg weight

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force.

• Overall length: 360mm

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force.

• Overall length: 375mm

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force.

These hammers are non sparking / non marring.

• 30mm dia x 80mm face length
• 305g weight
• 270mm overall length

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force.

These hammers are non sparking / non marring.

• 35mm dia x 90mm face length
• 400g weight
• 280mm overall length

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force

• Overall length: 915mm