Essential test leads. Potentiometer | piercing probes | crocodile | flat terminals | signal tester and more.

• Potentiometer (variable resister) (1x)
• Signal tester / LED stroboscope (2x)
• Piercing probes (green / yellow)
• Test probe extension (2x)
• SRS (airbag) connector (1x)
• Crocodile clip adaptors (2x)
• Needle probes (4x)
• DMM test leads (2x)
• Banana plug extensions (4x)
• Flat terminals (8x)

This advanced system tester is designed to test all 12V auto batteries (lead, AGM, EFB, GEL etc) including stop / start batteries. The unit tests battery condition PLUS charging (alternator) and starter (crank) systems.

The battery test analyses battery health status to calculate actual cold cranking capability of the battery. The tester will advise whether the battery needs replacing, and is also able to identify a faulty battery before actual failure.

The cranking test analyses the starting circuit (including the starter motor) by measuring increases in starting torque load. The charging test analyses the charging system, detecting under or overcharging.

• Testing range: 100 - 2,000CCA
• Powered from vehicle's 12V battery | no internal battery required

Keep your Air Boy Soda Blaster running at peak performance with this high quality replacement soda blasting media. Made from pure baking soda, it features a precisely controlled particle size engineered specifically for soda blasting, ensuring smooth flow, consistent pressure, and reliable cleaning power.

Perfect for removing paint, carbon, grease, and light rust, this media delivers effective, non abrasive cleaning while remaining gentle on sensitive surfaces.

Whether you're tackling automotive restoration, machinery cleaning, or general workshop tasks, this soda media keeps your blaster performing at its best.

• Supplied in a Convenient 5kg Container
  - Provides ample blasting media for multiple jobs while ensuring easy storage, handling, and transport.
• Mandatory Use of P2 Respiratory Protection - always wear P2 rated respiratory protection to safeguard against fine airborne particles during use, ensuring safe operation in workshop and on site environments.
• Water Soluble Sodium Bicarbonate for Easy Cleanup
  - This media dissolves completely in water, making post-blasting cleanup simple, fast, and environmentally responsible.
  Avoid Inhaling the dust.

This funnel can be molded into different shapes making it ideal to drain hard to reach oil filters.

This size is ideal for use with passenger vehicles. A larger size is available which is more suited for larger vehicles (ET7268).

• Suitable for use with engine oil, brake fluid, ATF and coolant
• Size: 170mm x 372mm

The ET8626 is a professional battery and charging-system tester designed for fast, accurate assessment of all 12V automotive lead acid cranking batteries - including modern stop-start types, and for evaluating 12V and 24V alternator and starting system performance. This tester delivers clear, reliable diagnostics in seconds, and the built-in thermal printer allows you to produce instant test reports for customer records or workshop documentation.

• Compatible With All Major Battery Standards - accurately tests batteries across all common industry standards, ensuring reliable results whether you're working with automotive, commercial, marine, or deep cycle 12V batteries.
• High Load Voltage Testing for 12V & 24V Systems - maximum load voltage tests on both 12 volt and 24 volt electrical systems, making it suitable for cars, trucks, machinery, and mixed fleet applications.
• Built In Short Circuit & Reverse Polarity Protection - integrated safety features to prevent damage to the tester and the battery, even if connections are made incorrectly.
• Wide 100–2,000 CCA Testing Range - enabling accurate assessments of everything from small passenger batteries to heavy duty commercial units.

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force

• Non sparking / non marring
• Face diameter: 55mm
• Face length: 110mm
• 350mm overall length
• 1.05kg weight

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force.

• Overall length: 360mm

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force.

These hammers are non sparking / non marring.

• 30mm dia x 80mm face length
• 305g weight
• 270mm overall length

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force.

These hammers are non sparking / non marring.

• 35mm dia x 90mm face length
• 400g weight
• 280mm overall length

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force

• Overall length: 915mm

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force.

• Overall length: 915mm