This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

Perfect for connecting to fuel injectors, MAP and TPS sensors, as well as any weather pack seal type connectors. The modular design is compatible with any industry-standard, 4mm plug whether shrouded or not. All probes are supplied in a protective plastic tube.

• 4 colours | 0.7mm (0.028") OD back probe pins
• Made in UK quality
• 1000V CAT III 20A

An essential set of 18 keys for draining sumps, axles, gearboxes, differentials etc. 3/8" Sq Drv.

• Hex: 8, 9, 10, 12, 14, 17mm
• Square: 7, 8, 10, 11, 12, 13, 14mm
• Square: 5/16" (male), 3/8" (male) | 10mm (female)
• Spline (Sec): M16
• Triangular: 10mm

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force

• Non sparking / non marring
• Face diameter: 55mm
• Face length: 110mm
• 350mm overall length
• 1.05kg weight

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force.

• Overall length: 375mm

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force.

These hammers are non sparking / non marring.

• 30mm dia x 80mm face length
• 305g weight
• 270mm overall length

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force.

These hammers are non sparking / non marring.

• 35mm dia x 90mm face length
• 400g weight
• 280mm overall length

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force

• Overall length: 915mm

Professional quality hammers made from oil and cold resistant NBR materials. Hollow head contains steel particles that reduce rebound / apply extra force.

• Overall length: 915mm