Universal Harmonic Balancer Puller

SKU: DA9123

Automotive


Harmonic balancer puller & installer kit for easily servicing harmonic balancers and drive pulleys which are press fitted onto the crankshaft. The kit includes a range of metric / imperial bolts & adaptors.

  • Heavy duty 3/4" diameter forcing screw internally threaded to fit adaptors.
  • Adaptors: 7/16", 1//2", 9/16", 5/8", 3/4" UNF, 12 x 1.5mm, 14 x 1.5mm and 16 x 2.0mm.

SKU DA9123
Barcode # 9321280258587
Brand Automotive
Vehicle Make Universal

12 Months


Others also bought


Promo
Sonsbeek Car Tyre Inflator

Sonsbeek Car Tyre Inflator

  • 0 - 160 PSI measurement range
  • 1/4" NPT female inlet
  • 427mm hose length

Bonus
ETBBL
Promo
Thermal Imaging Camera Thermal Imaging Camera

Thermal Imaging Camera

SKU: ET2026B

Thermal Imaging Camera

Provides real time thermal imaging / surface temperature measurement. This unit features a digital camera to pinpoint the test area, over which the thermal image is overlaid.

Ideal for automotive, construction, electrical. For example, overheating wiring, hot / cold spots in brakes, wheel bearings, cooling systems, exhaust, fuse box, seats etc.

Updated version ! Wifi connectivity, rechargeable battery.

  • 256 x 192px infrared resolution
  • -20 deg C to 550 deg C temperature measurement range
  • 3.5" colour screen
  • 6.6GB internal storage
  • Rechargeable 26650mAh battery

Promo
Endeavour CANBus / LIN Tester

Endeavour CANBus / LIN Tester

Detect communication status of CAN and LIN lines both online / offline. Displays data, ID and baud rate.

  • Automatic CAN High and CAN Low identification
  • Automatic baud rate detection
  • Voltage measurement below 20V - whether signal is a pulse or constant voltage
  • Remote device - monitor signals remotely!
  • 9V / CR2032 batteries included


More from this category


3 Leg Self Gripping Gear Puller | 150mm Spread

3 Leg Self Gripping Gear Puller | 150mm Spread

A special self gripping puller with slim legs. Able to be used with a slide hammer.

  • Spread: 150mm
  • Reach: 150mm
  • Capacity: 1.1 tonnes

3 Leg Self Gripping Gear Puller | 200mm Spread

3 Leg Self Gripping Gear Puller | 200mm Spread

A special self gripping puller with slim legs. Able to be used with a slide hammer.

  • Spread: 15 - 200mm
  • Reach: 200mm
  • Capacity: 1.17 tonnes

Bearing Cup Remover

Bearing Cup Remover

SKU: DA3860

Bearing Cup Remover

Hardened drop forged alloy steel jaws for pulling internal bearing caps, seals bushings. A cone holds the jaws in place during pulling. Use with a 5/8-18 slide hammer.

  • 5/16" - 3-1/4" spread
  • 3-1/2" reach

Blind Hole Bearing Puller Kit (11 Pce)

Blind Hole Bearing Puller Kit (11 Pce)

A specialised kit for extracting blind hole bearings. This kit contains eight adaptors plus a slide hammer and two leg puller.

Please refer to the download link below for instruction manual / kit components.

Harmonic Balancer Puller Kit

Harmonic Balancer Puller Kit

For balancer, pulley, gear & flywheel. Drop forged 4-slot yoke and a variety of cap bolts and forcing screw tips make this set universal.

  • Includes 5/16" | 3/8" | M8 bolts.
  • Do NOT use with impact wrenches.