Brake spoons are used for brake lining adjustment on drum brakes. The special shape is designed to probe drum brake backing plates during adjustment.

• Suitable for screw / start type adjusters
• 124mm overall length

The ET2031B Universal Line Kit is a versatile, multi function diagnostic set designed for fast, secure connection to vehicle wiring during general engine testing and circuit evaluation. It enables quick probing, signal access, and component activation across a wide range of automotive systems, making it an essential tool for efficient fault finding and reliable electrical diagnostics.

This kit comes with a bonus multimeter - offering a comprehensive diagnostic solution.

• Dual-Function LED Testers - these two-way LED circuit testers allow for quick identification of power and ground signals, making fault-finding faster and more intuitive.
• Black & Red Multimeter Connector Leads - ensuring reliable connectivity for a wide range of diagnostic tasks.
• Round Terminal Adapters (Male & Female) to Banana Plug - male and female round terminal adapters connect seamlessly to standard banana plugs; ideal for interfacing with OEM wiring and connectors.
• Flat Blade Terminal Adapters (Male & Female) to Banana Plug - Includes flat blade terminal adapters for compatibility with common automotive spade connectors, improving versatility during testing.
• Variable Resistors with Banana Terminals - adjustable resistors allow technicians to simulate loads, test sensor circuits, and diagnose voltage dependent faults with confidence.
• Needle Style Piercing Probes - designed for clean, precise back-probing without damaging insulation; perfect for modern fine gauge wiring.
• Heavy Duty Alligator Clips - these rugged clips provide strong, secure connections to battery posts, chassis grounds, or test points, ensuring stable readings during diagnostic work.

Measures Visual Light Transmission (VLT) through windows treated with aftermarket window tint film. Each probe has a magnet that will hold against the glass for measurement.

• Two piece design allows users to check all windows on vehicle, including all fixed windows.
• Essential testing tool for vehicle inspections.
• 4x AAA batteries included.

A professional adaptor kit for use with our ETWH505H pressure blake bleeder kit. This adaptor kit contains a wide range of vehicle specific adaptors, as well as universal style adaptors.

• Nitto style connectors
• 12 pce kit

Extra long double box wrench set designed for accessing hard to reach areas. Mirror chrome finish. Made from durable 6140 alloy steel.

Contains six imperial size wrenches.

• 1/4 x 5/16
• 3/8 x 7/16
• 1/2 x 9/16
• 5/8 x 11/16
• 3/4 x 7/8
• 13/16 x 15/16

The legendary driveway tyre inflator for Australian conditions - is now also available in a digital model. This digital model is suitable for inflating truck tyres.

Repair kit available 124MK3-RK

• Extremely robust aluminium body with protective rubber bumper - Long accurate life expectancy
• Small 'stubby' body is the lightest metal bodied digital inflator on the market - Easy to use with reduced fatigue
• Slimline biomorphic body shape gives increased comfort for the user - Fast to use and handle
• Higher pressure range for multiple applications 4 - 250 psi range (including trucks) - Versatile and flexible saving time and money
• Permanently backlit in use, auto off after 25 seconds no-use - Easy to read in dark workshops or at night - Increased flexibility saving cost and time
• Large screen and clear digits - Easy and quick to read - Increasing accuracy and speed of use
• IP54 - can be used indoors and outdoors, saving time and increasing service
• Individually tested and certified against national approved gauges - Guaranteed accuracy
• Long battery life - 400 hours of use - Replaceable 2 X AAA batteries power unit (supplied)
• 3 units of calibration toggle as standard - psi, bar & kPa
• 2 second button hold for calibration toggle
• Registered Design

Made from TPR material, this organiser rack holds 15 wrenches. TPR is a softer plastic allowing wrenches to be held more securely, but still easily removeable.

This organiser rack is reverse facing. So when placed next to a standard forward facing organiser rack, the wrenches sizes still face towards you, while at the same time taking up less space in your toolbox.

A space saving design!

• Reverse facing
• Holds 15 wrenches
• Made from TPR material
• For use in toolbox or wall mounted

A specialised kit for removing dust / dirt / rust when reseating ABS sensors. The kit contains 5 reamers, and one drill to suit most European vehilces.

Designed for use with a 1/4" drv flexible ratchet handle (not included).

• M10 x 133mm | VAG, Holden
• M14 x 42.5mm | BMW
• M15 x 33.5mm | Mercedes, Mazda, Toyota, Ford
• M18 x 31.5mm | VAG, BMW (E36 | E46)
• M18 x 42.5mm | VAG, NFZ
• M8 x 180mm Drill | VW T5

A specialised reamer for ABS wheel speed sensors. The fixture hole should be thoroughly cleaned before replacing the sensor.

This 11mm reamer enables precise cleaning of the fixture hole, without expanding the hole diameter / damaging the sensor wheel.

• 11mm diameter reamer
• Applications: VAG, including Golf Gen 6 / 7, Audi A3, Skoda Octavia, SEAT Leon

For Bendix brakes that have a return spring hooking over a post. The socket end removes springs by rotating the hook post off. The opposite end leverages spring onto post.

• Equivalent to Bendix S13P

This file is designed for removing corrosion, road dirt, brake dust etc from calipers / carriers when replacing brake discs / pads. The reverse blade also functions as a scraper for harder to remove residue.

• Flat 155mm parallel blade with diagonal coarse grooves to reduce clogging.
• Extra slim 10mm style, especially useful on Japanese vehicles with narrow caliper carriers.
• Double sided for easy use.

A handy set of three different pairs of brake caliper hooks. These hooks are ideal for hanging components such as brake calipers, coolant hoses, engine cables, fuel lines etc so that they are not damaged during service.

• Small rigid (red coated) hooks - 160mm long x 6mm dia
• Large rigid (red coated) hooks - 210mm long x 8.3mm dia
• Large flexible (green coated) hooks - 210mm long x 8.3mm dia