This kit facilitates the replacement of the timing belt on the Chrysler DOHC common rail diesel engine fitted with / without balance shafts in the Voyager, Grand Voyager & LDV Maxus van by locking the crankshaft at TDC & camshafts in their timed positions.

• Engine codes: ENJ | ENR, SC28R150Q5 | SC25R136Q4
• Applications: Jeep Cherokee (01-08) | LDV T60 | V80
• For later model vehicles with a single camshaft sprocket, refer ET4370.

The Silvertronic Professional Multimeter Lead Kit is a premium-quality test lead set designed for use with standard digital and analogue multimeters. Featuring high-quality double-insulated silicone leads, this professional kit delivers exceptional flexibility, durability, and safety for technicians, electricians, automotive specialists, and electronics professionals.

Silvertronic's premium double-insulated silicone test leads are designed to meet IEC 61010 safety requirements and are rated to CAT III 1000V.

• Back probes
• Lantern probes
• Alligator clips
• 1.2m double insulated silicone leads

A specialised kit for removing dust / dirt / rust when reseating ABS sensors. The kit contains 5 reamers, and one drill to suit most European vehilces.

Designed for use with a 1/4" drv flexible ratchet handle (not included).

• M10 x 133mm | VAG, Holden
• M14 x 42.5mm | BMW
• M15 x 33.5mm | Mercedes, Mazda, Toyota, Ford
• M18 x 31.5mm | VAG, BMW (E36 | E46)
• M18 x 42.5mm | VAG, NFZ
• M8 x 180mm Drill | VW T5

A specialised reamer for ABS wheel speed sensors. The fixture hole should be thoroughly cleaned before replacing the sensor.

This 11mm reamer enables precise cleaning of the fixture hole, without expanding the hole diameter / damaging the sensor wheel.

• 11mm diameter reamer
• Applications: VAG, including Golf Gen 6 / 7, Audi A3, Skoda Octavia, SEAT Leon

For Bendix brakes that have a return spring hooking over a post. The socket end removes springs by rotating the hook post off. The opposite end leverages spring onto post.

• Equivalent to Bendix S13P

This file is designed for removing corrosion, road dirt, brake dust etc from calipers / carriers when replacing brake discs / pads. The reverse blade also functions as a scraper for harder to remove residue.

• Flat 155mm parallel blade with diagonal coarse grooves to reduce clogging.
• Extra slim 10mm style, especially useful on Japanese vehicles with narrow caliper carriers.
• Double sided for easy use.

A handy set of three different pairs of brake caliper hooks. These hooks are ideal for hanging components such as brake calipers, coolant hoses, engine cables, fuel lines etc so that they are not damaged during service.

• Small rigid (red coated) hooks - 160mm long x 6mm dia
• Large rigid (red coated) hooks - 210mm long x 8.3mm dia
• Large flexible (green coated) hooks - 210mm long x 8.3mm dia