Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. 25mm dia is suitable for flushing hoses up to 7/8".

• Suitable for all Air Boy blow (and other) guns with an 8mm dia pipe.
• Actively locks onto the blow gun pipe.
• Non-marring rubber surface protects against scratching delicate surfaces.

Updated model with extra plate to fit virtually all passenger / commercial vehicles. Ratcheting handle with reversing switch makes it convenient to use in any position, and also centrally distributes force to prevent piston misalignment.

• Works on most single / multi piston calipers.
• Size range: 1-9/16" - 2-5/8"
• Includes magnetic 7" extended adaptor plates to suit multi piston calipers on heavy duty vehicles.

Reach deeper, work smarter, and remove components with precision using the Groz Extended Pick & Hook Set. This six-piece set features extra long shafts that provide easy access to hard-to-reach areas where standard picks and hooks simply can't reach. Perfect for removing O-rings, seals, clips, cotter pins, springs, gaskets, and electrical connectors.

• 250mm overall length
• Heat treated tool steel shaft hardened to 50 - 58 HRC
• Straight Pick | Complex Pick | Combination Pick | Double Angle Pick | 90 Degree Pick | 180 Degree Pick
• Comfortable ergonomic handles

Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. 15mm diameter suits small pipes.

• Suitable for all Air Boy blow (and other) guns with an 8mm dia pipe.
• Actively locks onto the blow gun pipe.
• Non-marring rubber surface protects against scratching delicate surfaces.

Combines air / water, with pulsating effect, for more effective coolant system cleaning.

Universal application, with adaptors for large bore main hoses & smaller heater matrix sizes.

• Clean radiators / engine blocks / heater cores
• Uses shop air / standard water hose

This set is designed to refill radiator coolant by creating a vacuum in the cooling system, allowing coolant to be replaced without introducing air pockets. Supplied with a cone shaped adaptor to suit a variety of radiator filler necks.

• Lift vehicle / drain old coolant / replace drain plug
• Hang vacuum unit under bonnet
• Connect coolant hose and drain hose to vacuum pump (check that all valves are closed)
• Put coolant hose in coolant / make sure hose is always submerged
• Turn on vacuum switch and vacuum valve. Turn off once vacuum is created
• Turn on coolant valve. Coolant will flow into the radiator