Cutting edge technology delivers a massive 1,275Nm breakaway torque in a super compact, lightweight tool. Only 92mm long, and weighing less than 1.35kg. Ergonomically designed, with rubber grip. Single handed forward / reverse for easy one handed use. Composite body. Backed by a 24 month warranty.

Ideal for use in tight spaces.

• 1/2" Sq Drv
• Length: 92mm
• Jumbo hammer
• Breakaway torque: 1,275Nm
• Working Torque: 25-320 Ft Lb (34-434 Nm)

Specialised female ribe sockets in 1/2" Sq Drv for clutches, cylinder heads and balance shaft fixings. Commonly used on Nissan / Renault vehicles, and Toyota idler pulley belts.

Impact grade for use with air tools.

• M6 | M8 | M10 | M12 Female ribe sockets
• 1/2" Sq Drv
• Chrome Moly construction

An incredibly handy set of wheel nut sockets. These flip sockets include new half size sockets for chrome covered nuts which have become swollen / warped.

Inflated / warped chrome plated caps are a common problem, especially on some Ford vehicles. Standard sized wheel nut sockets will not fit, and a half sized variant is required.

• Sizes: 17 x 19mm | 17.5mm | 18.5 x 19.5mm | 21 x 21.5mm | 22 x 22.5mm
• 1/2" Sq Drv extension (75mm long)

Thin wall wheel nut socket with special 17mm profile for Mercedes vehicles. Impact grade with nylon sleeve to protect against scratching alloy wheels.

Applications include Mercedes C Class (W204) and E Class (W211 | W212 | W207)

NEW DESIGN! The patented ring at the top of the sockets helps prevent breakage. As such, these sockets last up to 4 times longer than traditional thin wall wheel nut sockets. A plastic sleeve helps protects surfaces.

• 1/2" Sq Drv
• Size: 17mm (special profile)
• Impact grade
• Thin wall (with protective sleeve)

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

Single handed brake bleeding. Powered by the vehicle's own battery. No shop air required!

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.

A professional quality automotive battery tester for testing both 12V lithium ion and lead acid batteries. This tester uses conductance technology; a passive testing methodology which does not discharge / drain the battery. This analyser also checks the alternator's charging and starter's cranking condition.

• Tests all 12V lithium ion / lead acid batteries for cars / motor cycles.
• Print function via PC printer
• Testing range: Lithium ion 20- 1000CCA | Lead acid 20 - 2000CCA

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

DC powered timing light for use on 12V petrol engines. High intensity prefocused flashes clearly pick up engine timing mark.

• Double check indicator tests for incorrect hook up or faulty Xenon tube
• Universal spark plug adaptor installs in seconds
• Replaceable Xenon flash tube

This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• CAT III 600V rating