Manual type pressure tank to refill ATF on automatic transmissions without a dipstick. Includes 21 adapters for most common vehicles.

Tank with 6 litre / 1.5 gallon capacity, suitable for most transmissions - Audi, Ford, Holden, Mercedes, Nissan, Toyota, VW, and Volvo et c.

Specially designed tank base for feet to step on to stabilise the tank while pumping.

• Includes 21 adaptors

The Power Probe 4 Master Combo Kit combines the Power Probe 4, ECT3000 and various accessories to provide the ultimate combination of diagnostic and circuit-testing capabilities.

The Power Probe 4 provides simplified testing of Motors, Lights, Relays, and Sensors, and even Fuel Injectors. Also, like all Power Probe circuit-testers, it supplies Power and Ground for functional component testing on or off the vehicle. The ECT3000 will help you trace short and open circuits quickly and accurately.

The Power Probe Maestro is a cutting edge circuit tester designed for professional automotive diagnostics. As part of the Pro Series, it features advanced multimeter functions, diagnostic modes, and an easy-to-read color LCD display housed in a rugged, dust- and water-resistant casing.

With scope-like trace mode, DC and AC voltmeter capabilities, and fuel injector testing, the Maestro simplifies troubleshooting for motors, lights, relays, sensors, wires, and communication circuits. It operates on 12V and 24V systems, offering precise voltage, resistance, and frequency measurements.

Additionally, the Maestro pairs wirelessly with the Power Probe app, enabling remote display, data streaming, and recording for enhanced diagnostics.

Files can be emailed, exported or simply saved for future reference.

Easily verify correct operation of:

• Motors
• Lights
• Relays
• Sensors
• Wires

A must for all workshops. This ATF transmission fluid filler comes with a 15 pce adaptor kit (durable metal construction) giving it near universal coverage.

• 15 pce metal adaptor kit includes VW DSG, VZ Commodore, Falcon
• Large 12.5L tank

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display

Measures up to 20A (and as low as 1 milliamp). Displays current in realtime. Adaptors work with all Power Probe circuit testers!

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar. This high pressure bleeder is compatible with electro-hydraulic braking systems that operate at a higher pressure than conventional systems.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.
• Adjustable pressure from 0 - 3 Bar.
• Powered by the vehicle's 12V battery
• Compatible with DOT 3 | DOT 4 | DOT 5.1 brake fluids

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

Achieve perfect torque every time with this versatile and reliable torque adapter. The ET1234 Torque Adapter is a precision tool designed to prevent over-tightening of delicate components, such as plastic and aluminum oil filter canisters and filters, and sump plugs etc. It converts any 3/8" drive ratchet or breaker bar into a 25 Nm torque wrench, ensuring accurate tightening to manufacturer specifications.

• Accurate Torque Control: Converts any 3/8" drive ratchet or breaker bar into a precise 25 Nm torque wrench. Protect components from damage caused by over tightening.
• Durable Construction: Built with high-quality materials to ensure long-lasting performance.
• User-Friendly Design: Simple to attach and use with a 3/8" drive tool.
• Not for use with impact / pneumatic tools.

Discover the power of precision cleaning with ultrasonic cleaners! These cutting-edge devices use high-frequency sound waves to effortlessly remove dirt, grime, and contaminants from even the most delicate surfaces. Perfect for jewelry, eyeglasses, medical tools, and more, ultrasonic cleaners deliver professional-level results in minutesÑall from the comfort of your home or workspace. Say goodbye to tedious scrubbing and hello to sparkling perfection.

• Die cast 304 stainless steel tank
• 0-80¼C temperature range
• 1-99 minutes working time
• 60W ultrasonic cleaning power
• 40KHz for intensive rinse
• Tank size: 150 x 140 x 100mm
• Tank capacity: 2 litres
• Power supply: 220V / 50Hz

An essential glovebox / toolbox addition! One socket drives 4 common wheel nut sizes - saving both space and weight. Impact grade for use with both hand / impact tools.

Supplied with bonus extension bar.

• 6 point (single hex)
• Sizes: 17 | 19 | 21 |22mm
• 1/2" Sq Drv
• Impact grade