Locks onto gas struts during vehicle service, to enable the struts to be fixed in an extended position. Essential safety tool.
Universal application for all gas struts on boots, bonnets, hatchbanks etc, as the clamp simply locks onto the strut's shaft.
You may also like
Others also bought
The Iroda Thermoglue TG-600 glue gun is completely portable, allowing you to work almost anywhere. Using a refillable fuel cell, the TG-600 runs continuously for up to 100 minutes on a full fuel cell.
Fast, even adhesive flow with standard 1/2" diameter glue sticks. Instant glue flow cutoff reduces dripping. Temperature range of 160 - 220 degrees C. Reaches working temperature in just 3 - 5 minutes.
- Runs continuously for up to 100 minutes
- Uses standard 11mm & 12mm glue sticks
- Automatic temperature control
- Ergonomic trigger feed system for less hand fatigue
- Automatic ignition
Top of the range butane iron for the professional user. Patented LECª removable fuel cell for uninterrupted use, safety & reliability even at very lower temperatures. LECª refills easily with any brand of butane. LEC filters butane for no-clog operation.
Comes with soldering tips, safety wire stand, protective cap, solder, in a quality plastic case with foam insert.
- Automatic ignition
- 2 removable and refillable LEC (liquid energy cells)
- Includes solder, multiple tips, stand, protective cap and more
- Approximate tip temperature: 250 - 550 degrees C
- Torch temperature: 1300 degrees C
The PRO-25 represents the latest technology allowing for cordless soldering without butane. The PRO-25 has a rechargeable lithium battery.
This soldering iron also incorporate rapid heat technology allowing the unit to heat to 420 degrees C within 35 seconds. Maximum soldering temperature is 540 degrees C.
A more powerful 30W version is also available. See part number ETPRO-30W.
- Charge using micro USB cable
- Supplied with stand
More from this category
A specialised engine stabiliser bar for BMW vehicles.
The bar extends 1400mm, with two removeable supporting stands which can be set up on the threaded hole bases of the shock absorber upper base for more stable engine support. Universal joints on both supporting stands allow for the adjustment of the support bar in any direction.
An adjustable 720mm bar offers additional support to prevent the engine toppling over. And a secondary pair of stands is provided which can be set on the threaded holes of the linking bars in the engine bay.
- One forging hook and chain
- One hanging ring and locking ring which can be screwed directly onto the engine.